Clear Cure Goo Thick Epoxy 10cc Syringe

Description

The Clear Cure Goo Thick- your go-to material for everything saltwater! Clear Cure Goo Thick is perfect for creating baitheads on flies or whenever you need to build up material in larger amounts as it does not flow as fast as the Thin or Brushable. Which means you dont have to constantly battle a sag when you have a large amount of material out. Using the Clear Cure Goo Syringe is similar to using a caulk gun. To get started just apply a minimal amount of pressure. This will start the material coming out of the tip. Material will continue to come out until one of two things happens. You relieve the pressure in the syringe by pulling back slightly on the piston OR enough material has come out of the syringe to even out the pressure on both sides of the syringe. The Clear Cure Thin cures with a slight tacky feel to it. You can remove this by applying hand sanitizer ( 62% alcohol ) to it which will create a matte finish OR- you can apply a small layer of head cement or lacquer to it. I typically thin down my head cement to the tune of 2/3 head cement to 1/3 acetone. This allows the head cement to be applied in a very thin layer and aids in cutting down drying times. As always you can use all the Clear Cure Goo products in symphany to create the fly or look you desire. Meaning you could build a base layer using the Clear Cure Goo Thick and then finish it off with the Clear Cure Goo Brushable or Thin. Clear Cure Goo Thick comes in a 10ml syringe One application tip One shipping cap Recommended Curing Time: 7-10 seconds