Black Touch screen Digitizer Repair Kit for iPad 9.7" 2018 iPad 6 6th Gen A1893 A1954 Front Glass Replacement (Without Home Button,not include LCD) +Pre-Installed Adhesive + Tools

Everything you need simple to fit and get what you pay for very happy with what I got. Anyone buying this all I will say is be very careful when taking home button connection off as very fragile and take your time putting back together to ensure all connected correctly.

Itam was as described. But if you hold the ipad in the horizontal position there is an imaginary line down the middle going from top to bottom where the touch screen doesn't work. My sons pass code has a number 5 in it so he couldn't log on as that number is bang in the middle...

ordered 2 in white and one black they all have touch issues. these things take about 2 hours to replace when done properly, then using proper adhesive and clamps about 3 hours to set. i've wasted 3x repairs on theses and stress that i don't need. please no one order these things ill be returning the others.

Changed it myself at home. Works perfect. I have no complaints.

So my original iPad screen had a lot of tiny cracks in it, but I knew the home button was working fine, and the LCD underneath wasn’t damaged.I watched a couple of videos online on how to change the screen and thought for £20 I’d give it a go myself. I found ones changing shattered screens were probably the better ones to watch.WEAR SAFETY GOGGLES! I also ended up moving everything to the shed as the tiny bits of broken glass go everywhere!I tried heating up the old adhesive with hot water bottles at first, which weren’t that great. I found a heat gun in the shed which worked a treat. Maybe a hair dryer would work too?I didn’t find most of the tools included worked for me. I ended up using a flathead screwdriver to help scrape the screen up around the edges. My screen was too cracked for the suction cup to work.If this is your first time replacing a screen, make sure you start on the left hand side.Easy as you go when you reach the Home button as you don’t want to damage the button or ribbon wiring.Also be careful you don’t damage the LCD screen underneath. I just about finished removing the screen and accidentally scratched the LCD (it still works but can see the scratch, especially when the iPad isn’t in use)The screwdrivers that came with the productdidn’t fit. Luckily I had a tiny screwdriver set from a Christmas cracker which fitted fineWhen I was putting it back together with the new screen on, I turned the iPad on just to check it was working and then continued to put it back together.I pulled back the self adhesive strips and stuck it down. (They don’t stick that well, you may want a bit of superglue too) and then sandwiched it back in the iPad case. It’s now working fine. You can see little lines within the screen which just means it’s not as good quality as the original screen, but it all works fine there’s no dead areas which some people have talked aboutEDITTEDI’ve had this screen on for about 3 weeks now and it has cracked from the corner just by holding it. Wouldn’t recommend…

Screen was great, fixed in no time and good quality. Only down side, no instructions are provided so searched YouTube to get a how to.

Decent screen, works well for me. I cleaned the frame thoroughly, but in a couple of days I have got it coming apart a bit on a right lower side.

The tools that come with it are good quality however it seems the screen wasn’t. A vast majority of the screen was dead and when it did work it was very temperamental. Have since ordered one from another supplier and it now works flawlessly. Could be a faulty batch as others have had the same issue

Un po grande il nastro biadesivo interno ma nel completto ottimo prodotto

Attention !! Ne surtout pas acheter car le vitre tactile ne fonctionne pas!! Après montage on c'était aperçu que la moitié de l'écran tactile ne fonctionne pas ! En plus le système adhésif pour le coller ne colle pas complètement !!!