PLA 1kg 1.75mm Gold - 3D Printer Filament - FrontierFila
Product ID: 162805152
Colour Name:Gold PLA is the traditional, easy to print filament. If you have problems with bed adhesion, try to print the first layer at higher temperature and at a lower speed. Use a brim if necessary. If you still have problems, make sure your printing bed is carefully calibrated. If your bed is a tiny bit too near or far, bed adhesion won't be as good as it could be. If the filament gets stuck and you've checked the nozzle for blockage for no avail, the problem can also be a damaged nozzle throat lining.
J**S
Nice - but not 'gold'
Seems to print pretty well with my PLA+ profile (chose that as spool is marked as printing from 210c+)It's not 'gold' though - it's not unattractive mind (looks better than the photo shows).Don't want to pick on this spool especially, as I've yet to find any filament that truly looks anything like 'gold'Niggle here is that I'd say this looks like a 'good copper' (raw filament looks like some decent wiring) - and it would have been 5 stars if that had been the description of what I'd bought.The 'sparkle' is there nicely - no idea why they didn't just colour it more yellow.
A**N
Pleasantly surprised!
I ordered this to produce 3D printed face shields for local healthcare staff, and was really pleasantly surprised at just how good the quality of the filament was. Consistent colour, consistent filament diameter and consistently good prints. I still have a little left over, which I've used to print a few small items, and the finish is excellent - super smooth and glossy.
G**.
Very nice
I have been through 3-4 rolls of Silver and I have been very happy with the results. I have tried countless brands of silver PLA and this is the best I have found yet. It prints very clean and has a nice sparkly finish to it (like glitter). I haven't had any issues with clogs or jams or even holes/pockets after 3kg's worth (using stock extruders on Creality CR10 and Makerbot Replicator 2)
D**N
Broken spool, terrible winding, inconsistent extrusion, dull colour
Multiple failed prints due to poor spool winding. Extrusion rate seems to be affected too, incredibly inconsistent compared to other brands. The colour is also far from silver, at best I'd call it a dull grey, some previous reviews mentioned a glittery finish but at least from my particular roll, there are no glitter particulates at all. Lastly, the spool has a large chunk missing from one side, but no shards of plastic in the box, so it must have been damaged before being sealed, showing an absolute lack of care from FrontierFila.WOULD NOT RECOMMEND!
W**S
Excellent filament choice
Bought the silver filament after getting a bunch of samples earlier in the year. It prints beautifully, even on my cheap Wanhao i3 - very smooth surfaces & very robust parts, without much fiddeling. The colour and slight shine are unusual, and don't make you think immediately of 3d-printed parts.
M**.
Not gold
The colour is too dark
E**F
Five Stars
tis indeed gold thread
M**L
Vey Happy
Loved the temperature recommendation sticker, very helpful x !!! I wish every filament had one!Printed well at recommended settings
Trustpilot
4 days ago
1 day ago