16pcs Crystal Clear Transparent UV Epoxy Resin Non-Toxic No Preparation Required for Resin Jewelry Making Mold Casting Coating DIY Handcraft, with Portable USB-Powered UV Lamp Fast Curing

Description

Color:16pcs+lamp Package includes: 16 UV resin of 30ml, 1 UV lamp with USB charging cable Instructions: The use of the resin is very simple. It can be cured under UV lamp or UV torch (about 5-10 minutes, we recommend to add & cure the resin by layers, so that the curing time will be shorter). Also you can cure it with the sun when the sunlight is strong enough, taking about 35-60 minutes. When the weather is cold, it might take a bit longer. We recommend the use of gloves when using the resin just for easier cleaning. Directly pour the resin in the mold or the bezel. Add the pigment, glitter, dried flowers or anything you want in it using a toothpick or tweezers and cure the resin. Gradually add the amount of the pigment to adjust the color instead of pouring too much pigment at a time. How to avoid bubbles: 1. UV resin should be poured in silicone molds in layers, allowing air bubbles completely escape. 2. To expedite the process of escaping of bubbles and time of solidification of resin, the mold can be a bit warmed up. For example, heat the oven to 80℃(176℉), turn off, ventilate it a little and filled the mold with the resin. 3. Before using the resin, place it upside down to prevent air bubbles from escaping during extrusion. 4. Use a toothpick to concentrate the air bubbles on the surface of the resin. Puncture them with a pin or undo them by applying heat with a heat gun or a lighter.