Ultra Headlight Restoration Kit, Contains Masking Tape, Light Sanding Discs, Wax Protectant and More, Use on Plastic Lenses Headlights, Taillights and More, Easy Heavy-Duty Restoration (39195)

Follow directions!! Honestly took 30-45 minutes per headlight. I have large headlight lenses, 2013 Veloster, and used 1 kit on both of them. DO NOT PUSH TOO HARD!!! If you have a multi speed drill, run it on low. Took a ton of oxidation off and made for a very clear finish. Are they perfect? No. But considering the cost of replacing 1 of these lenses, this is an affordable option. Will update if durability is not as claimed, but I honestly plan to reapply the coating every 3 months to keep them looking fresh. Highly recommend!!

I have not tried every restoration system out there, so I cannot state that this is the best system, but I can tell you that this is a solid solution that you will be happy with. To level set, no restoration kit will ever restore your headlight lenses to factory new condition. But this one gets them close. For the same reasons, I cannot state that this kit is the best value, but I can say that anything that works well at any price is a better value than something that does not work well at a lower price. One of the chief complaints of headlight restoration kits is that the restoration does not last. That's because most of the kits out there attempt to "fill in" the scratches, and eventually that filler washes out, disintegrates, or whatever. This kit actually polishes the plastic to *remove* the scratches. As such, the process takes longer and is more fiddly. The extra effort though results in a better looking and longer lasting result. I bought this kit 2 years ago, and my headlights look as good as the day I finished using the kit. The results you will get will depend on your patience and your willingness to understand and follow the instructions exactly. Read the directions carefully, do exactly what they say, for as long as they say. I spent - if I recall - about 45 minutes on each headlight. - Your headlights will look much worse initially, and you may think you are doing more harm than good. Don't be paranoid. Complete the course, finish all the steps. Once you get through the first two grits, each step after that will look better and better. - The instructions will warn you to avoid lingering in one spot with the power drill. That warning worried me, but it's really easy to avoid, and you can tell when you're doing it right. Be gentle, don't push too hard, and keep moving. - It may also look like they haven't given you enough of the different polishing pads, but my headlights are huge and I had extras. - Mask carefully, because you will run off the edge of the headlights and you don't want to scratch your paint. If you wear down the masking tape, stop and apply more. - When it comes time to wipe on the polymer, again, do it exactly as they tell you. Exactly. You only get just enough to get it done and you only get one shot to make it look right. Make sure you are fully prepped before tearing open the packet. - Do this in a garage or in the shade. Anyway, that's my advice. You won't be disappointed with this kit.

This 3M Headlight Restoration Kit worked better than I expected. It was easy to follow the instructions, and my cloudy, yellowed headlights became much clearer after using it. The kit includes everything needed for the job and gives great results for the price. It made a noticeable difference in both the appearance of my car and nighttime visibility. I highly recommend it! ⭐⭐⭐⭐⭐

This kit worked really well and brought my headlights back to life. The instructions were easy to follow, and I’m happy with the results. My only suggestion would be to include a thicker masking tape. The tape that’s included is a bit thin, so if you’re not careful, the sandpaper can accidentally touch and scratch your car’s paint around the headlights. Using a thicker tape would provide better protection and make the process even safer. Overall, it’s a great product, and I would definitely recommend it.

My 13 year old truck had terrible looking headlights. They were only slightly yellow, but were so cloudy that you could no longer see inside the headlight. I saw a review on the YouTube channel Project Farm rating this as a good buy and decided to give it a try. It was not difficult to work through the steps (especially after watching a tutorial video online) but it did take me a bit longer than the 40 minutes stated on the box. But, it did a great job and it looks great! The finish is almost like new and I didn't need to purchase new headlight fixtures! I'd recommend this to anyone and I'd happily purchase this again. I have a minivan that's not looking bad yet, but when needed, I'll use this 3M product to restore those headlights, too.

Works so good. Def use water and a high powered drill (1200-1600rpm) or you’ll have to wait for the battery to charge up. Wish it came w one more grey refining disc 3000 grit. Overall satisfied w product. Look at the images before and after! Headlights look new and brighter lights at night.

When checking the oil in my daughter’s, 06 trailblazer I noticed her headlights were so yellow. She probably was getting maybe a quarter of the light coming out of it. Bought this kit thought it’s gotta help. Damn is all I can say now no no they’re not new but Man so clean and clear. They are almost like new now. Vision is gonna be amazing at night. For $22 can’t beat the price. Amazing works good. Doesn’t take long to do either using my Makita.

Time consuming but worth the effort, both headlights came out clear and looked great, if you have about 2 hours for each headlight this product works!

First time user of drill polish. Instructions are very clear and the results were amazing.

Die gute Nachricht ist, es funktioniert. Insbesondere das Coating korrigiert die letzten Fehler, die im Scheinwerferglas noch sichtbar sind. Um genauer zu arbeiten, wäre gerade es bei einem größeren Scheinwerfer sinnvoll, wenn man mit den Schleifpads nicht so knauserig wäre. Schließlich kostet das Set dann doch einiges an Geld, aber zwei Pads pro Arbeitsgang mehr wären schon eine Beruhigung. Dazu halte ich ein Polierpad und eine Headlight Politur für sinnvoll, wenn es richtig gut werden soll. Mit den beiden Coating Tüchern kann man auch die Rückleuchten behandeln. Die Menge reicht dafür aus. Es macht also Sinn, die Rückleuchten vorab zu reinigen, bevor man mit dem Coating anfängt. Der beiliegende Gummihandschuh ist eine gute Idee und auch notewndig, zwei wären besser. Meine Empfehlung: Alle Arbeitsgänge naßschleifen.

economico ed efficace!

Je n aurait pas cru à un résultat si parfait. Super facile à utiliser C était pour une polo 5, qui vient de passer le contrôle technique

作業自体は簡単だし、ヘッドライトのくもりガラスみたいになっていた14年分のくすみが取れてランプ本体の色形まではっきり見えるようになった。 バッテリー式の電動ドリルが要ることと、 ヤスリで研磨するとかなり粉が飛ぶので、まわりにかかってマズいものがないか注意と養生が必要。 初挑戦でまわりに気をつけながらゆっくりやってもヘッドライト2箇所計2時間くらい。 作業時間だけなら計1時間くらい。 手馴れてたり上手い人なら半分くらいの時間で終わるかも。