T4 TURBO MANIFOLD CAST for VORTEC LS MOTORS 4.8 5.3 5.7 6.0 6.2 4x2 4x4

Its a nice piece. It is on the larger side compared to the stock manifolds on my Saab97x/tbss. But can still make work with minor fab work

Nice manifold, worked good with my t4 turbo. Nice thick metal but there was a decent amount of flashing inside the runners. I used a dermal with a flex head attachment and different grinding stones to remove it.. it does line up with the cylinder head and the cross over pipe nicely. Also wish it came with a T4 gasket but it still worked out pretty good for me

Our Turbo bolted up to it perfectly, slight flashing between tunes but no big deal to remove, do it before you put it on the car for easier installing spark plugs. Saved $188. from a well known parts seller. Fast shipping recieved it before the date it said it would be here. Very happy with it.

I’m not going to sugar coat it you’re going to have to do some work with a die grinder to remove all the casting flash from the ports otherwise it’s a decent piece

Its a cheap cast part i would upgrade to a hooker turbo header. But with this you get to keep the ac 🔥. Rusted almost immediately and the over cast i had to chisel out was nuts.

Was a lot quicker then building one. 2 hours and a burr bit it's good to go. Seems to be ok so far.

The piece is nice and heavy, fit isn't to bad needed clearance around spark plugs. Has alot of casting flash east to cleanup with a little work. The inside is the most concerning needs attention due to the flash inside doesn't need breakage getting sucked into turbo.