VEVOR Hand Plate Shear 8", Manual Metal Cutter Cutting Thickness1/4 Inch Thick Max, Metal Steel Frame Snip Machine Benchtop 7/16 Inch Rod, for Shear Carbon Steel Plates and Bars , Blue

Has worked extremely well for cutting sheet metal. Cuts very precisely without distortion. I would recommend this to save time and messy cutting blades.

Well built it cuts amazing the tool save's my hand from using hand shears

Shears are pretty simple tools, nonetheless this one is executed well. Assembly takes about five minutes (just several bolts to make the handle) and that's about it. Tips: -like with all big cast iron tools, these ship with bolts not super tightened etc. to prevent cracking. So make sure the bolts are tight, it will help keep the cuts straight when using on thicker materiale. -Make sure to use the hold-down part (the black thing that holds the metal flat) - it will help keep the metal where it needs to be, and not allow it to "rise" and make the cut less straight. -Several smaller cuts are always better than one big one, if you can do such. also, cutting closer to the throat / inside will result in less deviation, depending on what you are cutting. Also, as with any standard tool check if there are any cracks in the cast iron. This is rare, but these boxes get thrown around a lot, and sometimes there might be a crack you might find after it's too late.

Heavy. That's good. I have been cutting up old Disson handsaw blades that are somewhat hardened. This cutter cuts them cleanly without much distortion. In the past I've used everything from an angle grinder, to a band saw, to heavy-duty snips and I've hated the cuts from all of these tools. This thing cuts really well and with minimal effort. And... the best thing... it's quiet. You don't have to plug it in. You don't need hearing protection or even a dust mask. In my experience it doesn't cut really thin flashing material all that, but I could probably adjust the cutter heads to be a bit tighter. The thin stuff has a tendency to bend and get wedged between the block and the cutter head. Overall, I love this thing. It was a great purchase and it was crazy-inexpensive... with shipping!

Works as it should and cuts beautifully. Heavy duty, sharp shear. I use it for mostly aluminum. Its cuts 3/16 like butter! Not great for super accurate cuts but for snipping off corners and small peices its ideal. Very easy to use, one handed operation. Came well packaged and not damaged. The reason I give this a 4 star is because the actual cutting length is 10.75 inch not 12. The shear plate itself is 12 so that is a little misleading. I would highly recommend as its a cheap option to shear metal with very little footprint.

Why did you pick this product vs others?: Excellent shear. Perfect for sheet metal. I was able to cut 1/8" with it no problem. But you need to make sure you have it mounted well. The description says it will cut 3/16". I believe it would but didn't have any to test. Great shop tool to have.

That’s the third Vevor tool I bought (after two print presses) and again, I have not been disappointed. The model I bought is the 12” shear, which I use to cut gauge 18 copper plates, that come in 12” x 12” or more. The hand shear cuts these 12” plates like paper, and the cut is very clean. I just had to bolt the shear on the workbench, so I could use two hands to pull the lever. The “hold-down” logic is a bit confusing at first, but it’s super useful once you get used to it. I protect the copper so the hold-down doesn’t leave a mark when unscrewing to hold. I checked around before buying the Vevor shear and every tool I found in the 12” range was around $300 after factoring in the shipping. I highly recommend this tool, and the brand.

Came in great shape. Assembly instructions were a bit spare. Bolts to secure it down not included.

Es exactamente lo que esperaba, es un equipo robusto bien hecho. Lo necesito pata cortar pequeñas plaquitas de acero inoxidable y aluminio. lo recomiendo ampliamente.

Cesoia / troncatrice di ottima qualità.

Das Element an sich wirkt sehr robust. Bei der Montage sind mir jedoch gleich mehrere Mängel aufgefallen: - angeschweißte Fußplatten sind verbogen - die Gewinde des Niederhalters sind so schlecht geschnitten, dass dieser sich kaum verstellen lässt - die Schneideklingen sind zum Teil blau lackiert. - der obere Teil des Hebels zum niederdrücken ist nur aufgesteckt, nicht befestigt. ärgerlich... Lieber ein paar Euro mehr verlangen und das Ganze dafür ordentlicher zu verarbeiten wäre sinnvoller gewesen.