Bike Phone Mount,Mountain Bicycle Handlebar Cell Holder,Fit Round Stem Cap

This bike phone mount is sturdy, well-designed, and gives a secure hold on the phone even during rough off-road rides. Installation was straightforward, and the locking mechanism feels reliable, giving peace of mind that the phone won’t pop out no matter how bumpy the trail gets. The only minor drawback is that with larger phones, the mount tends to vibrate slightly. It doesn’t affect safety or functionality, but it’s noticeable compared to smaller devices. Despite that, the phone has never slipped or come loose, which is the most important factor. Overall, it’s a strong and dependable mount — perfect for cycling, with just a bit of room for improvement in stability with bigger phones.

I hate buying things that haven't thoroughly been reviewed, but I took a chance on this, and I was pleasantly surprised. I tried this, because I used to use a top tube bag with a clear top for my phone, but I had a couple problems with it. I felt that (1) the bag was too close to me, and I had to really take my eyes off the road to look at my phone. (2) It's hard to access the power or volume buttons, and (3) the bag just doesn't look good. This mount solves all of those problems. This is a really sleek and secure way to have access to your phone for GPS tracking and/or music while biking. Your phone is mounted mostly parallel to the wind for minimal resistance. Your phone is closer to your hands for easier access. The mount bolts under a standard 32mm headset cap and fits perfectly. Your phone clips straight into the mount, then you flip the small locking lever to lock the phone to the mount. To dismount, flip the locking lever back and rotate the phone clockwise. This really is a brilliant system. Personally, I would recommend this mount for most types of riding (road, gravel, light trail). It's pretty dang secure, and I think it would be fine even in reasonably bumpy terrain. I would not recommend it for any kind serious MTB riding with a risk of dumping the bike. If your bike flips or crashes, your phone is still exposed, and it could easily get damaged, even if it doesn't come off the mount. Just a couple more tips and comments: + Once installed, the mount can be slightly bent up or down to adjust the preferred angle of the phone. - When the phone is locked to the mount, there is a tiny bit of rotational play. It still seems very secure though. ~ Before installing the mount, make sure to note the torque value of the headset bolt. If you don't have a torque driver, your local bike shop can do the install for you. ~ I recommend buying a dedicated phone case to attach the mounting plate to. Make sure it has a smooth, non-textured back so the plate can adhere securely.

I got this product looking for a place for my phone to be able to read Strava/Cyclemeter while I ride. I didn't want to put my phone on a bag, and didn't like a lot of the rubber band/zip tie/clamp devices and wanted something a bit more minimal. This is wonderful. I also worried about whether my phone would fly off while riding. Again, it's wonderful. I've hit bumps in excess of 25 mph in a strong cross wind with zero issues. The mount is great and fairly easy to install. Lastly, holder on the bike is made of metal, so if you need to bend it a little to get the phone at the angle you need it, no problem. A couple of thoughts to address some of the complaints about this: 1. If you have trouble getting your steering tube cap off, it might be because it's slightly held on by the stem. Loosen your stem to see if it releases the steering tube cap. 2. For those having issues with the universal mount on your phone/phone case. You MUST clean the case with something that will remove oil or any other contaminants from the surface you're sticking to. I made sure to use an alcohol swab on my case before hand, and it's been sticking rock solid for hundreds of miles now. 3. This should be obvious, but just in case... You have to have a flat surface for the universal mount to stick to, preferably with little to no texture. This should be pretty simple, if the thing is a big sticker essentially, you have to have maximum surface for it to stick to.

This was super easy to install, it positions my phone perfectly. The twist and lever latching mechanism is a little odd compared to the more expensive mounts, but once you get the hang of it, it's easy to use. Seems to be secure - I hit a bunch of hard bumps and it stayed put. The adhesive is 3M - good stuff. Only complaint is that it jiggles a bit in the mount. So like someone else did, I added a thickness of tape to take some of the play out of it. I'd suggest to the manufacturer that they work on making the connection tighter.

This is a great product and easy to use! It holds the phone in place perfectly!

Exactly what I needed

Better than the QuadLok but the only downside side is the tape they use did want to attach to my case. Idk if it's the plastic my case is made out of or if the tape is faulty but couldn't get it to stick. So I removed the tape and replaced with a 3M High Adhesion double sided tape. But other than that it works great the lock portion seem solid and the mounting on the stem was simple enough. Would recommend

I have been looking for a phone holder for my mountain bike for some time now. All the holders I have seen attached to the handlebars which I am not excited about being afraid of the mounting nut and bolts loosening after some time and forget to check before heading on a trail. I come across this phone holder that mounts to your handlebar stem. I liked the place meant and the fact that it mounts with existing bike part ( stem bolt). So, I bought it. Mounting was easy, only took two minutes making sure it was perfectly aligned. The 3m adhesive mount that you attach to the phone or case is really strong. I attached my phone to the mount and flicked the lever to lock the phone in the mount and gave it a couple of stress tests pulling and bending. After I unlocked the phone flicking the level to inspect. Not one mark no signs of stress marks or damage on the plastic holder on the phone case. The mount also showed no signs of damage or stress. I attached the phone to the holder and went for a test ride of an bumpy dirt trail. Even after all the wrenching I did to the mount, the mount and phone was still tightly secure not even a wiggle in the connection point. This is the best phone hold mount and sleekest. Definitely worth buying if this the type of mount you like and are looking for. I highly recommend this mount.

Easy to take your phone, phone screen is visible and safe. It will not fell off. I like it. Even when you put the round peace on your phone case BELOW CHARGING RING, you can sill do wireless charging.

Fácil de colocar.. y un uso perfecto

works great

This bike phone mount has been a great addition to my rides. It holds my phone securely in place, even on rough terrain, and gives me peace of mind that it won’t slip or fall. The installation was quick and straightforward, and it fits well on the handlebars without getting in the way. I also like how easy it is to attach and remove my phone when needed. Overall, it’s a reliable and well-designed mount that does exactly what it’s supposed to do.

見た目もカッコ良い 装着も便利 一つ言うのであれば首の角度をかなり下げる必要がある だが、あまり気にしなくても良いぐらいいい