SYLVANIA 9006 SilverStar Halogen Headlight Bulb, High or Low Beam, 2 Bulbs

Good product

They provide a noticeably bright, clear beam that makes driving at night feel much more comfortable and gives me better visibility on darker roads. Installation was straightforward on my Toyota camry and they were a great replacement for my older bulbs. It only took about 5 minutes to swap them out.

Nice compromise between yellow and Walmart Parking Lot blue. Makes older headlights seem a bit more modern. Lasted exactly 2 years. I replaced the fog lights with similar k value.

Great value. Worked well in my 2003 Chevy S10 Pickup

Cleanest and brightest for being halogen bulb fit my 03 Chevy keep my driven at night in all kinds of weather fits me need give them a try see they fit your application

Perfect fit. Been in for almost a year now, no issues. Had to look up on YouTube how to swap them out, but it was little effort with the proper tools.

These bulbs are an OEM replacement in a 2006 Ford Five Hundred- I noticed one low beam headlight out on my car and found these- happy I did - shipped quickly. See video and pics for more information- This is a fairly simple maintenance or upgrade that you can complete on your own - These bulbs are sold at a fair price and makes you feel good that you can save a trip to the mechanic for more technical issues. I am happy with the clarity and brightness of the bulbs. I wore gloves to avoid getting hand oils on the lenses which may shorten their lifespan. If you change one, change BOTH; the other bulb isn’t far behind . I was careful not to overly twist any wires and took my time with the replacement,,,they are removed and put back with a 1/4 twist - just take your time and don’t force anything. I hope this review was helpful- Good luck with your repair.

DOES NOT PARTICULARLY FIT 2008 PRIUS HEADLIGHT - EVEN THOUGH AMAZON CAR MATCH SAYS SO!!! This bulb IS ONLY CORRECT for the 2008 PRIUS FOG LIGHTS!!! - NOT HEADLIGHTs! The CORRECT OEM HEADLIGHT bulb for at least our 2008 Pirus is actually the: The German made OSRAM D4R HID Xenon Headlight Bulbs 66450 P32d-6 42V 35W = Toyota Original Manufacturer's headlight bulb for the Prius 2008 and many other years. See image to general shape - esp the base - which has NO 90 degree bend and “in-socket” connector. And you will find WAY better deals on these OSRAM bulbs with their 4 year warrantee - than you can for the Sylvania D4R bulbs - and all their want to Be’s like 1/2 / 1/3 the cost of the Sylvania bulb!!! AND OSRAM - has super blue white in the same model. BEWARE - there are a lot of FAKE OSRAM bulb Sellers - OBSRAM has created a Special Bulb Code - what shows on the outer package which you can check on OBSRAM’s website to authenticate their bulbs. BTW - ONCE YOU DO ORDER THE ACTUAL BULB YOU NEED (ass above) Here are some tips on getting the job done… HINT #1 - unlike most videos out there about this procedure - you do NOT need to detach the wire leading through the bulb protective (waterproofing) housing - before proceeding… 1) On the Passenger side you might want to 1st unplug both windshield washer wire plugs and move them entirely out of your way - as well as the plastic air intake housing to access. 2) on the Driver’s side - be sure to remove the fuse box cover to give you just that extra little bit more access 3) YOU DO NOT NEED TO DETACH THE WIRING LEADING THROUGH THE WATERPROOF HOUSING! That wire has a clip that is hard to press to release - and is unnecessary and works better if you allow it to remain in place. If your housing is rubber instead of firm plastic type you still do not need to detach the wire. 4) If you do have the same type of firm plastic unit as our 2008 - before removing this Waterproof Housing - NOTE the absolute position of the protective housing top “Leveraging Fin” (my name for the fins that stick out of this housing to allow you to have traction and leverage to unscrew and re-screw this house in into place). Before you turn it ~25* counter clockwise. I make the Fin that is Most Upward + Mark its installed position. 4b) Once noted and Marked - you’re going to turn the housing ~ 25 degrees Counter-clockwise - DO THIS SLOWLY - BECAUSE YOU ARE GOING TO REALLY WANT TO KNOW PRECISELY WHERE THE FINS INDICATE THE RELEASE POINT IS !!! Mark that Point! FOR EASY RE-ASSEMBLY - as you really will need to find this EXACT position when Re-placing it. 4d) Now you have a wire leading to your bulb though the housing you just removed - you may remove the bulb’s connecting wire now. 4e) You will find that there are 2 spring clip wires holing the bulb into its seated position - you’ll need to release pressure from both to free the bulb for removal. *** NOTE: If you expect to keep the bulbs you are removing for any reason - AND to avoid running the new bulbs you are installing - you either NEVER TOWUCH THEIR GLASS - Or always wear clean surgical like gloves to be sure you don’t contaminate the bulb glass with grease / dirt of any kind. Depending on the cleanliness of your engine compartment you may on ly want to dawn close after removing the protective housing and unfastening the spring wire clips. 4d) Once the holding spring wires are released - (and your gloved) you are free to slowly - counter clockwise rotate the bulb ~ 30* to release from its seated position - MOST IMPORTANT - Realize (MEMORIZE) the way you remove it at this very moment - because this position indicates UP^ for the bulb and so withdraw the bulb slowly and directly backward to note what that looks linke in the way your fingers are holding the bulb. NOTE: - also note in the UP^ position on bulb’s base the orientation that you will need to have the wire click onto to attach to the bulb once you’ve installed the new one. 5) Now that you’ve memorized the UP position of the bulb - You are ready to reverse the above procedures to install your new bulb. 5b) ALWAYS ONLY HANDLE THE BULB BY IT’s PLUG END 5c) Be sure that you have the UP^ Orientation correct as you are about to insert the bulb - BE SURE NOT TO TOUCH / PUT PRESSURE ON / BREAK the EXPOSED CERAMIC INSULATED WIRE leading from the base to the TOP of the Bulb. 5d) It can be most helpful to watch your bulb insertion from outside - through the headlight glass. 5e) If the God’s are with you - your UP^ position was perfect - and you will slide into the 2 point seating of the bulb - after which you will gently turn Clockwise to seat the bulb into its bracket. 5f) replace the 2 holding spring wires (note on some models this might be a single “U” 6) Having Noted UP^ position of the bulb’s base connector - look at the bulb’s wire and orient it accordingly and snuggling it up to the bulb’s base gently find it opposite mate and snap it into position. TEST THE LIGHTS HI / LO BEFORE PROCEEDING! 🙏. If it goes on bright and goes out - you may have blown that bulb - possibly touching the surface with dirt or finger grease - where it boils on the surface due to the heat - and poof If one or the other does not turn on - is may simply be that you didn’t click the wire connector well enough… check connections and re-TEST. REASSEMBLY: Interestingly enough although those of you who might have a flexible rubber housing should have little problem placing and getting this cover back on - the rest of you with the firm plastic with the turning leverage fins like ours - may want to use this trick - there is a large “O”ring that makes the final seal - and which will work with you to get this done quickly if you simple lubricate it with a touch of food grade spray silicone - making sure that it slips and slides easily in its housing slot. Because its one thing to actually find the 4 points of the waterproof housing’s attachment and line them up with their counterpart slots in the headlight housing - but pressing all the way around the WP housing while pushing that seal in place and then not having it slide easily - will drive you WILD! - AND often it leaves you having caught only 2 or 3 of the housing’s keys - which feels like your done - until you really check it out - that its really seated into the headlight and the gasket re-formed a watertight seal. Try lifting the far edge of the housing to test it… 7) Re-attach the 2 windshield washer wires to their positions 7b) reinstall the air duct vent and reattached the front cover plastic mounts you needed to remove to remover the air duct vent. Funny enough the hardest part of this - especially on the drivers side I found was because of the “O”ring gasket not being lubricated and easily moving in its housing slot. Best of Luck!

Love the bright light and the true white! Road visibility and safety is worth the price!

These bulbs are to replace the fog/daytime running light bulbs in my 2007 Nissan Murano, one of which has gone intermittent. (Already confirmed as the bulb & not the socket/wiring.) I have to say that I've had the vehicle since new in early 2008 and this if the very first time that ANY bulb has been replaced on the vehicle. To that end I can't comment on the longevity of these Sylvania bulbs by comparison, but past experience with the Silver Star line nearly 20 years ago in another vehicle was less than stellar to say the least. So, time will tell. Pricing on Amazon was about 10% less than local retail auto parts stores.

Oct 3, 2024 - Initial review ---------------------------------- I ordered these Sylvania Silverstar bulbs to replace one of my burnt out driver side bulb from 4 years ago. The left bulb was installed pretty much the day after it arrived. The review is not about the delivery packaging but the original blisterpack retail packaging seems a bit old. The outer plastic is dented at the corners of each bulb but nothing is damaged. I keep my original Silverstar cardboard package with each bulb replacement dated. This is so that I can determine how long each bulb lasts. Usually they last about 3-4 years. The price on this set of bulbs were amazing - they were like $26+ lower than retail stores! I tested the bulb I installed and it works like the other one that I installed on the right side a few weeks ago. I like these bulbs on my Corolla because they're definitely brighter and whiter than the OEM ones and I can see a lot more road in the dark. I tried Sylvania's one-step down model bulbs and they're almost as dim as the OEM and you're paying 3x more. I also tried Sylvania's super bright bulbs. They're expensive and lasts maybe 1-2 years max. Not worth the money that the Silverstar bulbs provide. Anyway, I'll provide an update on this review once the bulbs burn out in 3-4 years time. Hopefully, the bulbs will last that long.

Pour mes phares sur ma Corolla

Contrary to the website, these bulbs do not fit the vehicle they were purchased for (2007 Toyota 4Runner). Very disappointing .