KB Electronics Model KBWC-18K (UL) Variable Speed Fan Control, Wall Mount, Rated 8.0 Amps @ 120 VAC for use with Shaded Pole and PSC Motors

The KB Electronics 8811007 Solid State Variable Speed AC Electric Motor Control is a versatile and efficient motor controller that I've had the pleasure of using in various applications. This controller offers exceptional performance, reliability, and precise speed control, making it an invaluable tool for anyone working with AC electric motors.**Performance and Precision:**One of the standout features of the KB Electronics 8811007 controller is its ability to provide precise and consistent speed control for AC electric motors. It utilizes solid-state technology, which allows for smooth and reliable adjustments in motor speed. This level of precision is essential for applications where maintaining a specific motor speed is critical, such as in industrial equipment, conveyor systems, and HVAC systems.**Variable Speed Control:**The variable speed control feature is incredibly versatile. It allows you to adjust the motor speed within a wide range, giving you the flexibility to fine-tune the operation to your specific needs. This level of control is valuable for optimizing energy efficiency and performance in various applications.**Ease of Installation:**Installing the KB Electronics 8811007 controller is relatively straightforward, thanks to its user-friendly design. The controller comes with clear instructions and wiring diagrams, making it accessible to users with varying levels of technical expertise. It's compatible with standard 120V AC motors, and the included wiring terminals are well-labeled for easy connection.**Durability and Build Quality:**This motor controller is built to last. It features a robust construction that can withstand the demands of industrial and commercial environments. The controller's heat sink design effectively dissipates heat generated during operation, ensuring longevity and reliable performance over time.**Safety Features:**Safety is a top priority with the KB Electronics 8811007 controller. It includes a current limiting feature that protects the motor from overcurrent conditions, which can lead to motor damage or failure. This added protection not only prolongs the lifespan of your motor but also contributes to overall safety in your application.**Versatility:**This motor controller is versatile and can be used in a wide range of applications, from industrial machinery to HVAC systems to power tools. Its adaptability makes it a valuable addition to any workspace where AC electric motors are used.**Noise Reduction:**The solid-state technology used in this controller results in quieter motor operation compared to some traditional motor control methods, reducing noise pollution in your workspace.In conclusion, the KB Electronics 8811007 Solid State Variable Speed AC Electric Motor Control is a high-quality and versatile motor controller that excels in precision, performance, and durability. Whether you're looking to optimize the speed of an AC electric motor in an industrial setting or improve the efficiency of your HVAC system, this controller offers the control and reliability you need. Its ease of installation and safety features make it accessible to a wide range of users. I highly recommend the KB Electronics motor controller for anyone seeking an efficient and dependable solution for AC motor speed control.

Purchased this controller to run an existing bathroom exhaust fan at lower speed for noise reduction. It works just fine for this purpose. However depending how much speed reduction is dialed in may change as the motor and controller heats up to operating temperature. It has been working well for several months now in this application.

Easy to install, works good, but would have preferred for lower rpm on low.

This review is for the KBWC-13K solid state speed control. I purchased this controller with intent of modifying it so the fan of my Magic Heat unit would run slower and be less noisy when the woodstove fire was producing less heat. The Magic Heat uses a simple (on/off) thermostat controlled 1/200 hp single speed shaded pole fan motor to circulate heat into the room. So my next step after receiving the KBWC-13K was to disassemble it to see what I was working with. The attached photo illustrates the few components that are inside. Overall the components, assembly and soldering are of very good quality. The only oddity is the small trimmer potentiometer (black circular part with blue center located in middle front of the picture) which is wedged up against the larger control knob potentiometer leads. There's no real problem here; just not a typical component mounting. I suspect the trimmer is located in this manner to prevent heavy handed screwdriver users from damaging the trimmer. Overall I am very pleased with the construction/quality of this product.There are three minor design “features” to keep in mind with this speed controller given it was originally developed back in the 1960's. Most users probably won't notice these; but should be aware of them. The first requires understanding that the two potentiometers are set up in parallel. The circuit triggers on whichever potentiometer is set to a lower resistance. So, if the trimmer is set so the motor has a high minimum speed, then there's very little usable speed adjustment range from the control knob and vice versa. The second is that the circuit has control setting hysteresis. This can be observed if you dial the speed of a motor down to a very slow steady rpm and then disconnect the power to the circuit (as happens with the thermostat switch of the Magic Heat). When power is reapplied, the fan may struggle to start, if it does at all. If there was no hysteresis, the fan would spin back up to the original slow rpm setting. The third is the circuit's asymmetrical triggering of the triac. This can sometimes be heard as a repetitive, very low volume, loud-soft, HUM-hum-HUM-hum sound. This noise is often louder when working with old, poorly mounted, or cheaply made motors. I can usually identify this sound when I'm in an adjacent room where the low frequency of this noise comes through over the fan airflow noise. There's a ten page Teccor Electronics application note AN1003 on the web that provides a more technical understanding of this type of speed control.The entire controller operates at AC line voltages so disassembly and modification should only be done by a person educated/trained in AC power circuits/electronics. Here I'm suggesting an alternative use for the KBWC-13K; not a detailed modification process with essential safety considerations.The KBWC-13K potentiometers are configured as two-terminal components (center terminal, the “wiper”, is connected to one of the end terminals). This means I can easily replace the trimmer potentiometer with a two terminal negative temperature coefficient (NTC) thermistor. With a suitable NTC in place of the trimmer, the motor rpm will hold a steady slow speed at room temperature and increase the motor rpm with increasing temperatures up to the full motor speed at some desired high temperature. The control knob potentiometer is now used like the original trimmer to increase the minimum motor speed if it happens to be too slow at the desired low temperature. Another similar modification back in the 1970's/1980's was using a photocell in place of the trimmer which makes the fan speed up with increasing light levels. Keep in mind that these are low cost, simplistic controllers; the performance can vary significantly from one installation to another.After the modified controller was connected into the Magic Heat circuit, I decided to measure the fan current consumption. While the shaded pole fan was performing very well with the controller from minimum to maximum speed; measurements showed the fan was only 10% efficient at full speed and only slightly better at reduced speeds. Shaded pole motors under 1/15-1/20 hp are known to have very low efficiency which is what prompted me to test the current consumption. A Permanent Split Capacitor (PSC) motor usually has about double the efficiency of a similar hp shaded pole motor. So I modified the Magic Heat to use a PSC motor. However, the PSC motor was surprisingly noisy and sluggish when starting at low speed settings. An on-line search revealed that for a PSC motor, only the main (“run”) winding should be controlled by a phase type speed controller while the auxiliary (“start”; one with the capacitor) winding should bypass the speed control so it always has full AC power. The common two wire installation of the speed control has it wired in series with the motor so the motors' run and start windings are in parallel and powered by the controller simultaneously. This alternate approach makes the motor a 3-wire configuration, eliminating use of the built-in on/off switch of the speed controller (which I wasn't using anyway), and requires a separate on/off power switch (Magic Heat thermostat covers that). Having full voltage on the start winding, regardless of the speed controller setting on the run winding, provides full power for motor starting at all speed control settings. This modification reduces the slow speed operating noise (to a point) and increases motor efficiency at reduced speeds. In my installation, the 3-wire PSC motor configuration operates at a full speed efficiency of 33% and increases to a high of 53% at the minimum speed. Again, this is a modification that should only be performed by an electrician.Final note. If plan on buying 3 or more controllers; find a seller that reduces the selling price for buying multiple units vs a flat rate per unit. Sellers that adjust the built-in shipping costs according to the weight of your purchase may save you some money for multiple units. The single unit pricing of this Amazon seller is reasonable for a one or two unit purchase.

I just replaced the 50 year old Hydronic Unit Heater in our garage. The fan motor had finally given out and parts were not available. It had a 2 speed fan and I usually ran it on the slower speed to cut down the fan noise. We have a bedroom on the other side of the back garage wall.I bought a Modine model HC33 unit heater with a 1/25th HP single speed fan motor rated at 1550 rpm. The fan is pretty noisy so I needed to add a Solid State Speed Control to slow it down. 1/25th HP at 120 vac draws about 0.3 amps. I ordered the KB Electronics 8811006 Solid State Variable Speed AC Electric Motor Control, 2.5 Max amp, 115V, KBWC-13K from Amazon. The on/off switch was a bonus!I am also using a Honeywell Aquastat to turn the fan on when the water is hot and off when cold. That should add some longevity to the motor.It works great! I turned down the speed until the heater is quiet and it still keeps our garage warm!

Looked great worked 5 min and now not working. Bought a very basic one from local hardware for 10$ and works fine.