Oversized Padded Zero Gravity Chair, Folding Outdoor Patio Recliner, XL Anti Gravity Lounger for Backyard w/Headrest, Cup Holder, Side Tray, Polyester Mesh - Tan

The chairs have an elastic string mesh system that makes the chair feel like I’m sitting on a bedroom mattress. It is very cushiony and bounces very gently as I move around. It is well above my expectations, especially when I consider the very reasonable price. I now recommend these chairs to everyone I know. All my friends who sit on it just want to lay back and rest for a while…. The styling and red color is beautiful. I spend several thousand dollars a year on products from Amazon, and this is one of my favorite items I’ve ever purchased. My girlfriend loves it too. Everyday we go outside on the patio, a couple of times per day, to sit in these chairs for 30 minutes or so. They are very relaxing. I highly recommend these chairs. The metal frame seems structurally very well built. Btw, no assembly is necessary…. Just pull out of the box and attach the cup holder to the side. It slides on easily. If you choose to lay back, there is a nice locking mechanism you simply pull down to hold any position. The neck pad easily slides up and down for support wherever you want it.

This chair is good looking, comfortable and easy to get into and out of as zero gravity recliners go. So far, it seems sturdy. Good value as well.

Pros: Overall comfortable, width, appearance. Cons: Not easily portable, lock doesn't stay locked, reclines but not truly "zero gravity".This lounge has just enough padding to add some softness, is a couple of inches wider than the standard lounges so overall is very comfortable. While it does recline it does not go into a fully level feet above heart level. The purple and violet color scheme with the black frame looks great and feels sturdy, but it is heavy, so be aware if you are looking for a lounge to take on the go. Because of it being less portable, it has only been used inside so far, so I can't address the issue others have noted about rusting. The lock on each side supposed to keep the lounge in the chosen reclining position does not always hold and remain in that position. Sometimes I'll hear some random clicks as it slowly slips out of position and I need to readjust myself and put the circle "lock" back into the locked position. Finally, the bottom leg section is too long to fold flat against the chair when in the upright position and stays pointing out 7" from the seat section so getting into it is a challenge for a 5'2" person. I wish there was a face canopy on this model for when it is used outside or at least available to purchase for it, so maybe they can work on that!

This is the second one I’ve bought. It is really easy to operate, very comfortable, and reasonably priced. I read a post dated July 9th by Sureshoe on this chair and took his advice and have a bit more to add.First, Sureshoe suggested tightening the screws some to prevent the nut from coming off. Great idea. Now, add to that some LocTight/ thread lock compound to the threads exposed as in pic. This will add to the probability of the nut staying on.Second, I took some 3/4” foam pipe insulation (3/4” hole and about 2” in diameter), made a slit along the slit line in the foam tubing and cut four 5” pieces to attach to the corner bottom braces so as to buffer the hard ground or ground irregularities. By protecting the braces this way, the plastic is less likely to wear out or crack. They are attached with two zip ties. Next, I attached about a 20” or so piece of the same foam pipe insulation around the lower part that comes up to meet/hold one’s feet. The pic shows the three zip ties I used…..with…..the pulled out tabs for tightening the zip ties facing downward away from where my legs/feet will rest. Now the chair is, imho, perfect. It rests on padding not wearing out the plastic corner braces, has padding for my feet, and the nuts are more firmly set and less likely to loosen up and fall off.I have owned many of such chairs for camping, porch use, and for hours of sitting at car shows and these are simply THE best I’ve come across.After a while with the “pool noodle like” foam pipe insulation, I replaced them with a denser foam pipe insulation and put a rubber tape on the bottoms to protect the insulation from an abrasive ground. The cheaper pool noodle type foam tended to pop/crush real easily causing me to redo with the denser pipe insulation. I also double rolled with pipe insulation the foot rest so there is no digging into the backs of your legs when resting your feet/legs on it. I used 3/4” ID for the covering of the metal leg piece and 11/4” ID to go over the first covering. Using the next size bigger allows for a more thorough wrap on top of the first. Btw…..when I put the foam on the bar prior to the zip ties, I put rubber cement on the metal bar and the inside of the foam so as to prevent free rolling. I also used rubber cement on the outside of the first foam and on the inside of the second foam all prior to doing up the zip ties. See pics 4-7. This did not take too long to do and is well worth the effort. It also does not cost much to do. Both my chairs have been working great and my long legs no longer get that “dug in” soreness after resting them on the double-padded foot rest while napping in the chair on my porch.Well…..spring is almost here, and my wife decided she wanted one of these too. Yep….I ordered a third chair and got it today. It came quickly and had no damage. I put the lock -tite on the 4 or 5 nuts on each side and it’s ready to go out to the screened in porch soon. Just thought you might like to know that my buying a third one means I really like these. After all, my car show chair (lots of sitting) did half a season last year just wonderfully.

I purchased the chair is hopes that it would relieve sciatic nerve pressure, unfortunately it doesn't. VERY hard and painful to get out of once in the chair.The chair is comfortable for everyone that doesn't have back issues. Very wide and lots of padding in the cushions and the table is a great addition.

I have scoliosis and there are times I can never get comfortable. This chair is a miracle for my back. It's sturdy, easy to control, easy to lock. It's just perfect.

I bought this chair to put out on my new deck but upon receipt there was a broken plastic piece. I contacted the seller asking if they could replace just that plastic piece. Instead, 2 days later, a new chair was delivered to my home and I was informed not to return the first chair. So, great product, I love my new chair. AND excellent customer service. Thank you so much.

These chairs are well-made and comfortable. They are sturdy and can support a lot of weight. They look classy. They do take a while to dry after a rain and the fabric- unlike netting -can hold dirt and stain (think bird droppings, ketchup, mud, etc.) I wish they had a visor connected to them to block the sun.