Server Cabinet Case 19 Inch Rack Mount DJ Locking Lockable Deep Drawer with Key 2U

What can I say? It's steel rack drawer that works. It's a 2U, 2 post (cantilevered) drawer, fully enclosed. Its interior space is 16" wide by 13" deep by 3" high (except for a bump in the front middle where the lock goes) and pulls out to almost exactly 12" (all but 1 inch) without sagging. It has a soft, useful detent to hold it closed but pulls open easily with two fingers and slides well. It comes with a pack of rack screws. Everything is neatly finished, with no sharp edges or odd protrusions. There's a lock with two keys. Work it a few times to unstick it the first time, then it'll be fine. It won't keep a paperclip-equipped human out for more than ten seconds. The back of the drawer features three round holes that are covered with removable rubber-ish grommets. These holes are exactly large enough to (barely) pass a standard straight US power plug through. Any fancier form of power plug (like those nice right-angle ones) will not make it. This means you can, for example, charge a laptop or tablet (or screwdriver, or flashlight) you store in there.

I ordered this 'drawer system' from Amazon to fill in a cabinet space under our Blu-ray player. Fits perfectly, eliminates the 'gap', and adds a quality, functional drawer for DVDs, flash drives, etc. as part of our Home Theater. I can imagine several additional uses for this drawer...

First off, this product was ordered early Friday morning and arrived late Saturday afternoon, even amidst the COVID-19 panic happening right now, which is amazing. The drawers are very nice for the money; the sheet metal is a little thin and will bend if you aren't careful putting them in the rack, but once they are installed they are perfectly fine. The handles are a little small for my hands, but the locks and drawers work as they should and are nice and smooth. One caveat, the rack screws provided are hot garbage and will strip if you so much as look at them funny. Spend a few dollars on quality rack screws from a hardware store and you'll be golden.

Got 2 of these drawers after purchasing lower quality ones from another seller. These are nice drawers, sturdy and have a nice positive lock, no rattle. I mounted these to my road case and they are great. Drawers open easily and don't bind up or touch the item underneath. I'd recommend these to anyone looking for a good drawer but don't want to spend money on the high priced ones you see from other companies

Good drawer, I have no idea why there is so much conflicting info on it here though, or all other drawers on amazon for that matter. Nobody seems to be able to get their own measurements right. The actual measurements are... outside dimensions, if you're fitting this in a tight spot with little room to spare... 13.25" deep x 17.5" wide x 3.5" tall. The wing tabs add 1.5" making it 19" across the front with them included. Also, the tabs are the metal of the sides bent out, not additional parts that are spot welded or bolted in, so they are not removable. The interior dimensions of the drawer are 13" deep x 16" wide x 3.25" tall. The outer part that holds the drawer is a C shape, so there is no bottom under the drawer, or back. The back of the drawer is the back of the unit. Which means if you're mounting this under a desk like me and not in a rack, you can pull the drawer out, drill up through the top sheet metal, screw it down and shut the drawer. I don't know why the other person said there was a bottom sheet blocking that, there isn't. The sticker on the front came off easily and didn't hurt the paint. Everything is bolted together well. The metal is heavier gauge than I expected and the sliders are nicely smooth. My only complaint is that that C shape outer enclosure is not bent perfectly square, it needed to be bent in a little more. Not enough to effect the function or really be able to tell from more than a few feet away though. And I wish the tabs were removable other than hacksawing them off.

Just a tip when installing! Definitely get a second person to hold it when screwing it into the rack.. I tried doing it myself and it was a big struggle as the drawer is actually heavier than you think! We use it in our church as our IEM/stagebox... the key works great and we store all of our headphones/mic clips/mics in it.. It works great does exactly what you want it to do. The drawers are also smooth and doesn't feel cheap at all.

The drawer slides easy but still has just the right amount of stick when closed to keep it from too easily sliding open. Good quality material and manufacturing. Good value when compared to a shelf of the same price. Recommended.

This product is exactly what I have been looking for. It’s very sturdy, it’s deep enough to hold my things, and it functions well. Nothing is broken, everything fits, and it feels like it will last a long time. There are holes in the back for cable control.

Justo lo Que ocupaba

Il est vrai que ce tiroir ouvre facilement lorsque non barré, mais le rack une fois vissé de niveau au mur, le problème est résolu !!!

Practico para el uso que le des

Left rack ears are bent and the paint is flaked off; Shipping box, product box, and packing material aren't damaged so this was clearly already damaged when it was packed. The keys and rack mounting hardware are missing. This is the second one of these I've bought that was damaged and missing the hardware. There's not going to be a third time. Too bad because these are quite solid and seems well built. However, the import fees make these a little too pricey for what they are. If they would arrive undamaged and with all the parts, I would definitely give 4 stars, maybe even 5. But receiving two in a row with the same exact issues doesn't give me a lot of confidence in the product or the company.

MUY BUEN PRODUCTO A MIS CLIENTES LES HA GUSTADO