UniqueMe [2+2 Pack] Unique Me Compatible with Samsung Galaxy S10 Full Coverage Flexible TPU Screen Protector and Camera Lens Protector 【Not Fit for Samsung S10 Plus】

Galaxy S10. I just removed the Zagg screen protector I just bought a few weeks ago - never adhered to rounded edges. I thought I just didn't position it correctly, but when I finally got it right (perfectly centered) it didn't adhere ON EITHER SIDE. So frustrating. This on the other hand... perfect. I followed the instructions exactly and it went on perfectly. AND the sides are perfectly adhered, too. The application method is very smart and gives great results. Part of the reason this is good and goes on great (and the sides stick) is because it isn't as hard as the Zagg screen protector. You can Marr the surface with your fingernail by pressing hard on it, so it might not take hard impacts as well as with the Zagg, but the Zagg was constantly peeling up, and I've had it less than a month. But then again, the Zagg got scratched the day I got it - something caught it just right and left a very noticeable scratch. This is soft enough I doubt it would have scratched the same way - part of what they call the self-healing property of it. So it's kind of soft, but it isn't sticky - my finger still glides across the surface easily (and I swype, so I'm constantly sliding my finger across my keyboard). So overall, very happy with this. I'll probably get a second order - I keep my phones a long time, which means it gets hard to find stuff when it gets old. So worth stocking up - this is the best I've found yet.

OK I kinda rushed the first try. came out absolutely horrible. The videos on the website were NOT the same application for this so it was confusing. Instead, the instructions manual is very clear. The 2nd time was a breeze because I then knew the process. After knowing the process now, I absolutely recommend this product. Feels super slick and just like the original glass on the Samsung S10. Fingerprint works most of the time. Not really a concern with it though. does it get dirty quick? absolutely. just like if it was bare glass. if your hands are greasy or oily. the screen picks it up. It is indeed case friendly. The Camera lens protector was a breeze to do. align it correctly and push in the center. it quickly spreads and fill 100% with no bubbles as long as you cleaned the camera lens with alcohol. do NOT wipe the protector itself. You have to trust the company at this point. The cloth to wipe can leave lint behind. make sure you use the stickers to clean it up before applying the screen and lens protector. Overall. I recommend. as long as you take your time and follow instructions. Will buy again if needed.

although it doesn't compare to the original OP9 screen protector , it still holds up decently well , especially combined with how many you get and how cheap it is ! the one ive had on has a few cracks (which i unfortunately can't show due to lack of second camera) , but ive also had it for a few months . my touch screen works as good as normal , but at first i had a few issues with the fingerprint reader . however , it seems to have gotten slightly better , so im not sure what it is . if you have the money , go for the original , but otherwise this works perfectly fine !

When I got my OnePlus 8t+ from Tmobile, my solitary choice for screen protector was a whopping 50$ for the Invisible Shield brand - one that admittedly worked quite well. Unfortunately, working a lot of steel shelves at my store, the screen protector was pulverized when it fell out of my hands. It was virtually IMPOSSIBLE to find a replacement until I decided to give the Uniqueme a go, and it was the best split-second decision I've made. The installation is fairly straightforward, and the screen is still crisp and clear after application, and I find the added camera protector to be a GREAT bonus. There is only one complaint I have, and that is that after I installed it, I had to adjust it slightly to get rid of a bubble, and after doing so noticed there is some lift where I had to lift the screen to fix the bubble that will not go away, likely due to weakening of the adhesive. So this protector is a definite 'measure twice, cut once'. Fortunately, however, the fact that there are 2 spares in the box made this quite salvageable. The only other note I have is that it DOES work with fingerprint readers, but it necessitated re-setting the fingerprint after installation to be consistent. Again, a minor quibble. Oneplus has a bit of a drought on screen protectors, so for any shopping I can offer nothing but a solid recommendation for the Uniqueme pack (even with the minor gripes outlined above), which services as well as my invisible shield did thus far, and at 1/5 the price. Absolute thumbs up.

UPDATE: 4-24 i have come to really like this type of screen protector. It is a flexible sheet of plastic, not hard or stiff. It magically attaches itself to the screen and any tiny bubbles disappear in a day or two after applying. One day my phone went flying across the room and hit something with the screen. it protected well but it had 2 tears in it, a very small one, just a mm or two. the other sizable, maybe up to 10mm. I was bummed. but the self-healing properties of this is unbelievable. by the end of the day you couldn't find the small tear and a day or so later i had to examine it to find the larger. the small corner that never attached from the original install never got larger. I bought this type of protector for my watch as well and it has been working just as good. came with little blue align tool that plugs in usb port. didn't quite line up selfie camera hole but i don't really care, it works ok and i rarely use it. installed nicely , laid down smooth and fits well. touch seems good. especially when i'm dried out for winter. one corner won't quite lay down on the curved edge of the screen. i don't think its going to matter in the long run.

This is a great product. One of the things I dread most is having to put on a new screen protector. Especially on the S10 with the fingerprint sensor. So many protectors come with this extra sticky pad under the screen protector. I wanted no part of that and so have been putting this off for a while now even though my factory installed protector was in rough shape. However, this protector doesn't have that extra sticky pad under the screen protector and claimed it worked with the fingerprint sensor....and IT DOES!!! Was it hard to put on? I don't think so. It's a procedure, but one that is well worth the effort because it went on so beautifully. I watched the video 3 times before I started. The push paddle was smaller than in the video, the one in the video looked like it was the width of the screen and the one that came was shorter. However, I just centered it and it worked great. First try, only 2 of the smallest bubbles on the bottom corner edge. They said to leave small bubbles alone and that they would dissipate in 24 hours and they did. So NO BUBBLES! The edges seem to be holding really well. Better than the factory installed protector. Bottom line...installed first try, perfect fit, no bubbles, no lift, works with fingerprint sensor. Its been a couples of days now and still good. This is one of the best products I've purchased. Highly recommend!

The video was really helpful in attaching the protector, even though things were labeled differently than what I received. Problem 1 - Only 2 alcohol wipes and 2 dust stickers were included for the set of 2 screen protectors. Each set consists of a protector for the main screen and one for the camera. So a total of 4 (wipes & stickers) are needed. Problem 2 - The alcohol wipe was virtually dry. Problem 3 - There is a very slight ripple in the protector on the bottom left. It's actually not a big deal since it doesn't seem to distort what I'm looking at. But with the screen off, it is noticeable when the light hits it just right. (Ultimately not an issue for me, but it does indicate a potential concern about quality control overall. But also admittedly, maybe that will disappear as the protector molds to my screen over the next couple of weeks). Problem 4 - The protector for the camera, doesn't quite fit perfectly. It didn't stay in place. A few hours after installing, I noticed that it bubbled up on one side, almost coming off. I had to slide it back into place for the bubble to disappear. Hopefully as the protector settles in, it will stick better and not move. A day later, it seems to be better. [UPDATE: It stays in place, but can still be moved with concerted effort. Didn't become an issue really. BUT the flash on my camera reflects slightly off of the protector. So there is obvious grey glaze on the photos compared to the bright crisp colors without it. I ended up taking it off the camera.] It seems to be thick enough to protect my screen and absorb shock. I like that. The plastic feels slightly pliable (which may help it absorb shock better, but that's just a guess). So that made it easier to push out mini air bubbles. But my nail sometimes "catches" on it when swiping. So it's not as smooth as swiping on pure glass, but that doesn't really bother me. It is just a little weird to get used to. And the pliability makes it show indentations of anything that has firmly pressed on the screen. At first I was worried, the markings wouldn't go away, but after a few minutes it "gels" back into smooth place. [UPDATE: Because of this gel-like pliability, if something is pressed up against the screen protector for a while, it will leave a temporary indentation. At first it's alarming, but it goes away after a short time.] So there are several issues, but for the price point and the amount of complaints I saw on similarly priced protectors at this time, I'd probably still buy them again. I've had no issues with screen sensitivity or my fingerprint reader with this protector on. And the video made it easy to install.

This is probably hands down the best quality tempered glass cover on the amazon store at this price point. The install was very easy. It comes with a snap on bumper that helps center the glass, so between that using the front camera hole as a reference point installation is super easy. I did crack the corner of my first cover because I slightly overlapped the corner of the bumper with the glass ad pressed down and cracked it. That was my clumsy fault. Second cover went one flawlessly and still have a back up. My clear silicone gel case works perfect with it. It leaves enough space over the edges to let a case with a lip not get in the way. The camera glass cover is just awesome too. Gives so much more peace of mind. And still have a back up of both the main screen and camera. And there is. Lifetime warranty for the same device. Another great thing is they offer you a thank you gift after registration of product online. So for under $10 you are technically getting an hd tempered glass cover AND a silicone gel case. Which I would have known before I brought one separate. And since you get 3 covers you can mess one up, get the second one perfect if the first one isn't and then still have a back up. Then if need be make a warranty. Claim you really have nothing to use. Only downside is if you drop phones often you going to go through many of these. Like most tempered glass covers they will probably crack while saving your screen from damage and scratches of waist level or higher drops.

By far the easiest and cleanest protector installation I've ever use. No bs spray to use, the system makes it almost impossible to get dust on as long as you use the provided stickers and cleaner. Best part, next to zero time spent on alignment. Would buy again.

First of all, love the fact that the three screen protectors come with the camera lens protectors as well. It's very easy to install and it's working very nicely so far. The guidance stickers were very helpful and you don't see a lot of the screen protectors come with them. In my opinion, I love the product.

Excelente producto, de buena calidad

Perfect fit, easy to install and no bubbles

Why has no one else thought of that frame??? It's genius! This is simply the best replacement glass screen protector/install-system I have ever used on any phone. Super easy to install and you CANNOT install it any way but perfectly. I highly recommend this product! The glass is good too. Had one little bubble but it disappeared within an hour of install. I change the glass a lot. I like my OnePlus 8T looking new all the time. This is my new go-to. Bravo UniqueMe. Excellent product.