Runleader Digital Tach Hour Meter,Engine Temperature Gauge,Alert RPM & Temp,Backlights Display for Lawn Tractor Compressor Generator Snowmobile Marine Jet Ski Pit Bike

Runleader RL-HM035A Digial Hours/RPM/TEMP Meter Gauge, Maintenace service interval,RPM & Over-temperature alert, LCD display shutdown, Battery replaceable, Waterproof design.Product Features:Hours▶ Accumulate engine total and partial working hours when it shutdown, timing read up to 999,99 hours with 0.1/1 hour accuracy.▶ It restart from 0 when value exceed 999,99 hours.▶ Count-down tracking for maintenance time, display the arrival status by red backlight and flashed SVC icon.▶ Maintenance time range: 5-1000 hours with OFF selection.▶ TOT initial hours can be programmed for replace an old hour meter.▶ Record the times per engine working period.RPM▶ Record real-time RPM value when engine is on, measurement range 0-25000RPM with 10 RPM resolution.▶ Maximum RPM value record and recall.▶ Programmable RPM alert to remind the revolution speed exceed by red backlight display and flashed warning icon.▶ The engine firing patterns to be chosen for RPM accuracy adjustment,suitable for engine 2 stroke up to 3 cylinders, 4 stroke up to 16 cylinders and 6 stroke 2 cylinder.Temperaeture▶ Display the current and maximum engine temperature by connected probe sensor(TS002).▶ Maximum temperature value is resettable.▶ Over-temperature alert remind you the engine temperature exceed to keep the engine y.▶ When temperature value exceed alert value,it will display red backlight display and flashed warning icon.▶ Temp measurement & alert range: -20°C~+300°C(-4°F~+572°F)Specification▶ 24 Hours clock time display.▶ Internal replaceable CR2032 battery , Data retained after battery change.▶ LCD window size:approx.1.62×0.67 inches▶ Product size:approx.2.75X1.45X0.7 inches▶ Accessories: cut-out sticker,3M velcro, cable tie,bolts,nuts,washer,CR2032 Battery,TS002 probe senor,user manual.▶ Waterproof rate: IP67.

• HOURS ---- Monitor the total run time(TOT) and single working hours(JOB) of engine, with ability to program previous hours(INT) for an replacement;Accomplish maintenance at recommend intervals to determine the due time(SVC);TOT & JOB hours range:0-999,99 hours;SVC timer range:5-1000 hours..
• RPM ----- Display the real-time RPM readout by vairous engine firing patterns setting to adjust engine idle speed; Alert channel for revolution exceed reminder;Viewable highest revolution since the engine started; RPM measurement range: 0-25000RPM, Alert range: 100-25000RPM..
• TEMP ---- Keep eyes on engine current and maximum temperature at all the times by probe senor(The induction probe cannot be bent to avoid breakage); Remind the temperature exceed for engine maintenance; Easy to switch between Celsius and Fahrenheit;Temp measurement & alert range: -20°C~+300°C(-4°F~+572°F).
• BACKLIGHTS ---- Default green backlight will help to use it at night or dim place, you can set the backlight mode by always-on, OFF and automatical mode(OFF default, button to wake up) as request;Red backlight will remind the engine RPM or TEMP exceed..
• OTHERS ---- Easy to it on proper position by stick-on, screw-on and extra bracket(not include), one-wire wrapping of spark plug for signal detect (68.8inches, workable if shorten or extend) to work right away;Favorable water and shock resistence; Battery capacity will be kept in good condition with insulation sheet during transport, it is repalceable;LCD shutdown also can extend the lifetime in vacant time;Reliable technical support and after-sales service(2 years)..