ICFD6BN Double DIN Radio Installation Dash Kit Compatible with Select 2007-2010 Ford and Mercury Vehicles - Complete Basic Aftermarket Car Stereo Install Kit - See Fit Guide Image for Vehicles

fit is spot-on, lining up perfectly with the factory dash for a clean, professional appearance. It feels solid and well-made, offering plenty of sturdiness to keep everything securely in place.The wiring process was straightforward, and the overall functionality of the kit is exactly what I needed for a seamless install. It seems like it will have great long-term durability as well. Highly recommended for a factory-look upgrade.

Came with everything I did not need and needed can’t say enough about that

I finally did an install with this kit on an older 2006 Ford Explorer. The stock radio died so I bought a Boss BV9384NV second hand as I just need something basic like Bluetooth to answer calls, stream from my iPhone, and play old school CDs. (Yup, I still have some of those!) This kit was recommended as a fit for my SUV and the Boss double DIN radio I bought. Great value as it comes with the mounting kit, antenna adapter, the wiring harnesses (I only needed the main one since I don't have a separate amp), and a few crimp-wire connectors - I had enough for my install but you may need more if you have a more modern vehicle that requires more cables being connected. FOR MY INSTALL, I had to trim the back "fins"/screw holders as they were not needed and otherwise I wouldn't have been able to get the radio through the opening. I also didn't need the spacers. Happy install!

Very nice stereo had a little trouble getting the face plate right but overall excellent stereo

The only thing that worked in this kit is the little side tabs to mount the radio to the original bolt locations.the face bezel wouldnt fit around my radio and the wiring harness is wrong. The large plug does plug in but the kit doesnt list half the wire colors supplied in harness so no clue what they are for. The small plug looks nothing like the one on my 2007 f-150 xlt so now i basically have no subwoofer coming in to play. Id recommend wiring your own harness and making your own tabs over this bs.

Replaced the radio in my 05 Ford F350. The dash kit worked great, clean installation with no problems, looks great.

Alright, so got this for my ‘11 King Ranch F350 because I was balling on a budget and didn’t want to splurge on the PAC harness - I have much better things to spend 100 bucks on for this truck than a wiring harness for a radio, but I digress. This harness does NOT have the ACC pin off the red wire to bypass CANBUS in these trucks, so you’ll need to run a wire down and splice into another ACC wire on the truck instead of this harness, unless you like draining your batteries or have the brain capacity and memory to remember to turn the radio off every time you park - I sure don’t. To save you the two hours of headache, Reddit and powerstroke forum searching and several beers I had to go through - the passenger kick panel under your glovebox in the 11-16 super duties has a wiring harness by the fuse box. The purple and green striped wire is an ACC. Plus, you’ll retain the factory radio setting of the door opening shutting the radio off, which is pretty stellar. The dash kit itself definitely leaves a lot to be desired. It’s a china special, so I wasn’t expecting a lot, but the pieces certainly do not snap together, so you’re holding the side pieces onto the front dash bezel itself, which did not snap onto the radio I got, for the record, while also seating the radio in place, and getting your screws set, and getting the radio lined up and aligned correctly. Definitely would’ve returned it if I wasn’t so dedicated to just getting the darn thing in and installed, but it stays snug once it’s screwed in, and it looks fine as long as you don’t look at it too closely. For the price, you get a decent amount. The crimps are good (you’ll need more than they give you), and it does the job. If you’ve got a first gen 6.7 and you’re using a china special radio, you’ll learn a few new curse words doing this install with this kit though, that’s for sure.

Kit variado para adaptar el reproductor de tu auto si este queda pequeño en el marco. Menos mal que lo encontré para poder colocar el mío, gracias

Buen producto muy funcional

Installed in my 08 f350 Easy job with wire harness and trim kit 👌

No queda, es más chico que los equipos din2, se tiene que rebajar para instalarlo, instrucciones muy pobres

Worked perfectly for installing a 10” touch screen in my 2005 f350

So this is a copy of a better known brand, however they failed to copy it exactly. fitment is horrible. over 1/4" gap on the outside of bezel and 1/8" on inside. If you look close you can see the gaps. Also the side slides that mount to the bezel and head unit does not click together like other brands. I used a soldering iron to melt it in place to keep it from falling out during install. I was forced to use this because the other one was held up in customs. Yes it worked, most people would not notice the difference but if you really love your ride and want things looking clean - id give it a pass. This whole project was done on the cheap and I wanted AA ACP for under 200 CAD - which was achieved. The ATOTO unit f7 wireless was used. Use a wiring diagram since you will need to use some of the no name wires (brown) on the harness for steering wheel controls, and used the white plug for the sub - The red one did not work. ( in cases where you only have 1 sub out on the deck)