Kreg Drawer Front Mounting Tool Pro Kit - Steel Drawer Face Installation System - Create Consistent Gaps - Up to 1-1/2 Inch Overlay Alignment Tool - KCS-DFMT-PRO

These are excellent for cabinet installers.

This has proven to be pretty darn handy for installing drawer fronts. I had about 100 to do in a new house, and it definitely made getting them aligned much easier. Recommended because it saves you time and frustration, which is a lot more valuable than the cost of the tool. Be aware, these do not not work ideally in every situation. Due to the thickness of the metal, sometimes there was not enough space between the drawer box and the cabinet opening to close the drawer (to get alignment really close). Also, if you have end-panels installed that extend-out past the drawer front, they'll interfere with this bracket (and you can't get the drawer closed as much. Same thing if you have a wall right next to the cabinet. Still well worth the help they provided.

This is a very easy kreg set to use. The 2 clamps attached to the left and right side of the draw box then you close the draw in. Then the outside clamps the draw in place as you align it. Reopen the draw and screw te face on. Took all of 5 minutes to figure it out. One worthy note is you need at least 1/2 inch or so top cleaning for the clamps to slide in. Also it says tou need at least 1 3/4 inches high above the draw rails for it to close in as well. I didn't have to side height on the rail nut had clearance above my draw to shim the clamp 1/4 inch above the box. It works great. Saved me a lot of headache from my old method of installing the pull the drilling into the box. This was faster with better result.

Great product

I disappointed that there are only 5 stars, it deserves more. I have always struggled with mounting drawer fronts. Kreg hit the ball out of the park with this tool. It is so simple to set up and use. In a matter of minutes the drawer front is mounted PERFECTLY. Thanks Kreg, everyone who build cabinets, whether hobby or professionally should have this tool.

I can’t give it 5 stars because it just arrived yesterday but we’ve already used it to install drawer pulls on a new build out. So far so good and would recommend. Hopefully it will last for a long time.

worked really well. made mounting drawer fronts very easy.

Worked as it should

Ist ganz praktisch

Excellent produit. Intéressant d'avoir filtre poussière et gaz dans le même produit.

Excelente producto entregado en tiempo y forma

For overlay drawer-front installation, this product worked perfectly. Spend the extra dollar.

Me gustaría que fuera más rigido en las esquinas, ya que al apretarla se va doblando, por lo demas bueno, aunque estaria bien colocarle topes laterales para que todas las tapas quedaran igual.