Park Tool INF-2 Shop Inflator Tool,Blue, bule

This is a really well-made high quality tool and is a pleasure to use. It's probably a bit of a luxury for home use, but with careful use it should last a lifetime. Be aware though that you will need a thread adapter to use British/European air couplings. The input thread is an American thread - 3/8" NPT, so you will need a 3/8" NPT to 1/4" BSP adapter as shown in the photo. These are available from another well-known Internet site (ahem). If you use a quick-coupler system you'll also need to supply your choice of quick coupler (e.g. Euro or PCL) depending on your setup. The quick release coupler supplied with the tool looks like a Euro type, but it is subtlely different and leaks air if you use with a Euro coupler. As a small point, I found I needed to slacken the two screws that hold the the trigger lever very slightly - they were overly tight and were preventing the valve from closing fully when I released the trigger.

This was an expensive purchase for a private rather than business user, but the product itself is superb, solid, high quality and easy to use. Leak free inflation and pressure setting not takes just seconds, wish I had bought one years ago. Not for everyone due to the cost, but if you can afford it - go for it! One short afternote. You do need to buy an adaptor for use on UK airlines. It comes with an American one as standard. 3/8 NPT male to 1/4 BSP female are the sizes required.

Bought this for my home workshop as I have converted to tubeless tyres on all my bikes. Expensive but offset the cost against not buying a “tank” device for my track pump. I already Had a small compressor. You do need to buy an adapter for 1/4 “ fitting as the unit comes with an 3/8” fitting ( US). The inflator works really well. Inflating tyres in seconds. Good quality as with all Parkbtool.

Well made

You will need an NPT Male 3/8 to BSP Female 1/4 adapter. There are a few shops on Auction websites selling these for about £4 and you will need a QR fitting for your hose which are available on Amazon - I got a selection male and female for £10. Worth using Locktite on the threads. Lovely bit of luxury kit. Works great on tubeless tyres.

Needed a NPT to BSP converter as I have a BSP (euro quick connector) hose and compressor. This has an NPT male fitting - US - looks like a BSP but a bit thinner so does not fit into a BSP female coupler without leaking air. Now I have that sorted it works like a charm.

Bought this to set up tubeless tyres disappointed to find the male 3/8 air line coupler not compatible with the air line couplers used in uk as the uk stuff uses 1/4 thread and there seems to be nobody who sells uk couplers with a 3/8th thread this isn't really fit for the uk market.

Should have read the reviews! this tool does not work on Presta Valves. Also the compressor line fitting is not UK standard. Returned

Si tienes varias bicis que mantener, en casa somos tres los que montamos, merece la pena tener tu compresor y esta pistola ;) súper comoda

Work well

Top Qualität, man benötigt ggfls. einen Kupplungsstecker NW 7,2 G 3/8“ (siehe Bild) .

Great product and price

If you’re just looking for an inflator, this is not your tool. This is great for setting up tubeless tires and for fast one handed operation where a floor or hand pump would not suffice. A good tool should pay for itself in how much time it saves, and this will save you time- we are talking 10-20 seconds to fill up a tire, instead of what could be a few minutes, which adds up. Anybody who has set up tubeless tires knows how difficult that can be without the right tools too, and this is the tool you want for that. It’s also easier to attach to the valve than your typical floor pump, so it is less likely to eat your valve cores and gets the air where it needs to go much better than other methods. Of course if you run a fleet of bikes or you’re out there every day, this is going to make more sense than if the dust on your bike isn’t from the trail or road, but for ease of use, speed, relative accuracy (I always check but the gauge is relatively accurate most of the time) and utility, this is a great tool. It’s rugged, mostly metal and I’ve seen these last a long time even in a shop setting if well maintained.