Question 1

The description suggests that this has your cable adapter integrated into it and POE will work with a standard cat5 cable (no need to cross pairs)?

Accepted Answer

This device is only a PoE injector. It has 2 standard RJ45 connectors, and you do not need to cross pairs because it was designed for the required power injection pinout. You can use 2 connection options.
1. Cut off the standard Starlink connector and replace it with an RJ45 shielded connector (T-568B scheme crimping). Connect it to the PoE side of the injector, and apply 48V power.
2. Use an Adapter that will switch the interface from the Starlink connector to the RJ45. Connect the output of the Adapter to the PoE side of the injector with the cable from the kit, and apply 48V power. (If 30 cm of kit cable is not enough for you, you can use a more extended standard shielded cable, cat6 or better.)
- after that, you will have a standard RJ45 interface on the LAN side of the Injector. The cable to the computer or router from this connector is straight, without crossing.

Question 2

For the ethernet cable that goes between the router and this POE device, does it need to be T-568B?

Accepted Answer

In the literature that comes with the YAOSHENG Rectangular Dishy Cable Adapter to RJ45, it shows that a T-568B is used to connect from LAN to router

Question 3

If i don't also use  the "rectangular dishy cable adapter" and cut the end of cord coming from dishy, do i just do a t568-b pinout on the end?

Accepted Answer

I purchased one of these recently and it works perfectly. You are correct, you just cut the standard starlink cable and terminate it with the t568-b pinout (preferably with a shielded RJ45 connector)

Question 4

Will this work with the rectangular dishy, is that what you mean by "V2"?

Accepted Answer

Yes, you are right. Several names for this terminal were formed in different Starlink user communities: Rectangular Dishy or Dishy V2. 
You can find the connection template in the pictures.

YAOSHENG 150W GigE Passive PoE Injector with surge protection, developed for Starlink pinout.

Details

Details

Description

Common Questions