DAYUAN Diesel Injector Puller Tool with Slide Hammer, Fuel Injector Remover w...

Worked great on Mercedes OM642 injectors. I needed to remove a valve cover to change timing chain and didn’t discover that the injector had been leaking till I got everything else torn apart and the engine had cooled down so the Black Death had hardened. It’s MUCH easier to get the injector out when the engine is hot and the Black Death is soft. My injector was stuck such that I couldn’t rotate it by putting leverage on the retainer. I put enough pressure to break the retainer and the injector didn’t budge. I put the project on hold till this tool arrived and it saved me from having to reassemble everything and get the motor hot.

did the trick pulling my injectors on my 2003 vw tdi

It works. I have a 2015 Golf TDI. My injectors were stuck stuck. 2 of them came out relatively easy. The other 2 were impossible without this tool. That being said the last 2 still took nearly an hour each using this tool along with carb cleaner to break up the carbon. If your fuel line is off at the opposite angle than the injectors come out just pull up on the slide hammer as you bang away. It takes time but it works. Much better value than some of these crazy expensive options. It's made well. Still worth 5 stars.

This worked for my bmw e70 35d M57. I had the trim a little of the plastic coweling to get number 6 injector tho.

Perfect. Compact enough but powerful enough for Bosch diesel injectors.

You may need to remove components within the injector to make work.

Made my my stuck injector a brreeeeeeze!!! Highly Recommended!! Thank You China!!!

Makes removing old rusty injectors a breeze, it feels like cheating. It took less than a minute to remove both (Bosch) injectors from a Deutz F2L511 that I picked up from the scrap yard.

funkar som den ska

Worked good on my Case with the Cummins motor. Seems to be good quality. The old 9mm injectors on my 580E backhoe can be damaged at the leak-off line boss, if the nut is unscrewed too far at a time.

para bmw perfecto, un inyector muy clavado y con 3 golpes fuertes lo tienes fuera.

Extracteur d'injecteur parfait pour extraire mon injecteur sur Yanmar 4jh2e alors qu'il était comme soudé à la culasse. Il se visse au bout de l'injecteur, et le mouton fait parfaitement son travail, l'injecteur est sorti au bout de trois tentatives. Très bon outil, je recommande !

As described and heavy enough slideer