eXtremeRate Full Set Shell with Buttons Touchpad Cover Compatible with ps5 Edge Controller, Scarlet Red Replacement Decorative Trim Shell Front Back Plates Compatible with ps5 Edge Controller

After mixing “Hope Gray”, “Black”, and “Scarlet Red” complete shell kits and buttons for the Dualsense Edge controller, I was pleasantly surprised to discover the pieces all fit very well together. I had never did this before and found the instructional video was nearly sufficient to completely explain the process. There were 3 points in the installation video that became difficult. So I had searched for other videos and pieced together these other sources of information in order to solve the problems I was having. 1) The shoulder (trigger buttons L2 &R2) had springs that popped off when disassembled. These springs were not mentioned in the video at all, probably due to my Edge Controller being a different model than the one in the video. I was able to find another video source that completely described the installation of these springs. 2) The shoulder (trigger L2 & R2) buttons have a part inside the button that needs to be removed, but the video doesn’t completely describe how to remove these parts. I was able to piece together information from other videos to remove these parts from the buttons. 3) There were several occasions where the pieces would not fit together and I had to take them apart and reassemble them over and over until they finally fit. Patience was key here. These shell kits do not come with all the tools you may need, such as tweezers for electronics, hairdryer/heat gun for the touch control pad, and a magnetic pad for organizing all the screws that are removed in the disassembly process, and a magnetic screwdriver is a huge bonus. The installation process took me just about 3 hours to complete. I did not replace the touchpad. Had I replaced the touchpad, I assume the installation process would’ve taken another half hour. These complete shell kits are a great value when you consider the cost to have someone build a custom controller. I would’ve easily spent an additional $100-$200 dollars more if I had this custom built. Overall the look is great. I got everything I was looking for in controller with a customized shell. The pieces fit well together, (admittedly) after several attempts of reassembling them. I was fortunate not to have any unsightly gaps in between the pieces. The quality is great and is similar if not equal to the strength, thickness and durability of plastics used in a controller directly from PlayStation. Much like the original plastics that came with the controller, I found the grip of this shell to be rather slick. So I installed some thin, rubberized grip, which makes for a very nice non-slip grip. This grip also helps with keeping the controller from sliding around on a hard surface like a table. Now I’m very happy to have a controller that I love the look of!

I can honestly say that this kit is amazing and I must have if you don't like the stock dual sense colors I'm not going to lie it is quite an undertaking to completely strip the controller all the way down to replace things like the front face plates and buttons I didn't replace the touchpad or the L2 and R2 buttons because I like the way they were and that does add an even deeper level of complexity but despite just how much Tech is crammed into this tiny controller and how difficult of a takedown it is if you watch their video on their YouTube channel it's extremely helpful I honestly probably couldn't have done it without that video but they make it very clear and easy exactly what to do and how to do it the kid itself is very nice and all the parts are very nice high quality and they give you a ton of extra parts such as screws and Springs even more than you would need if you didn't have any of them at all but since you're changing in existing controller you actually already have all the screws and springs you need anyway so all of the ones given are technically extra so you don't even have to worry about dropping or missing pieces which you almost certainly probably will especially the tiny little Springs near the PlayStation logo button luckily I found mine and didn't have to use the ones provided but they are tricky everything fit absolutely perfectly in any of the reviews claiming otherwise or showing large gaps or broken clips we're almost 100% certainly user error you have to be very careful with what you're doing as those clips especially are easy to break and when snapping everything back together it has to go a very specific way and if it's not lined up correctly and you force it that's how things break or don't line up or create gaps if you're careful and do everything correctly everything fits perfectly the way it should I bought this kit mainly because I wanted a matte black front face plate but with all of the people I have seen gripe about the rubber pads peeling away from the back I thought this controller would be perfect for stippling so I did a very nice super fine stipple job over most of the parts of the controller that you hold on to I ended up keeping the main back plate as it has a slight more texture to it then the one that comes with this kit due to the tiny little microscopic X triangle Circle and square pattern molded into it overall I'm extremely happy and this is well worth every penny and I honestly can't believe that it is cheap as it is with how nice it is and what a major change it makes to the controller

Installation was easy, unfortunately you do need a heat gun and tweezers to successfully install the front grips and and touchpad. Im only giving 4 stars because the shell isnt perfect, there are minor gaps, which can be a problem with dust in the future but doesn't effect functionality. the place where the front and back meet at the end of the grips is slightly off, which doesn't effect anything but it bugs me.

I was excited to get this in the mail my stock shell was looking beat up. Item in packaging was kinda willy nilly not in the foam tray like they should have been but nothing was damaged or warped. Instructions online where easy enough to follow anyone with any sort of mechanical or assembling knowledge will be able to do this easily. Shell fit great I didn't replace all of my parts as I didn't want to use a heat gun or hair dryer but I hadn't planned on replacing the touch pad anyway. Overall would order this again and will recommend to my friends who are looking for a change in the appearance of Thier controller.

This product looked promising, but the quality is far from acceptable. The shell doesn’t align correctly with the original device, leaving noticeable gaps. The included buttons feel cheap and don’t provide the same tactile feedback as the original ones. The touchpad cover reduces responsiveness significantly, making it hard to use for precise movements.

Is totally compartments with the original Edge parts, so if you want to mix and match like I did is totally doable. I just wish the individual parts were more affordable, because for the parts I wanted was the same as buying the full set. The quality of the plastic is good, not the same as the original but once you have it on you won't feel the difference.

The shell does work, but has some fitment issues. Larger seam gaps, the joystick cover plate didn't sit securely, and aligning the usb-c plug required loosening parts that are seamless with the manufacturer shell. Also, there are raised lip where the soft grip normally is, which is an odd choice. It successfully changed the controller color, but not without issues.

Fits great, easily installed if you have the skills. Comes with a tool kit that does everything you need but you will need tweezers. Everything functions as intended after assembly. Feels better than the original shell. Seems as if it will hold up just as well as the original shell. Nothing makes it seem like the durability has been compromised. A win for me

منتج رديئ جداً لا انصح به

I will ExtremeRate the praise of not denying issues with the product and sending me one replacement when I initially complained and a refund when the replacement had the same issue. However from a product standpoint, i simply cannot recommend it. The back plate as seen in the photos simply do not “click” into place, they might make a clicking sound but they do not latch on. This ends up with extremely ugly gaps all around the controller. In the last photo i have used the OEM back plate alongside the other black pieces and whilst i looks passable, it definitely is not the full black look i was going for.

PERFEKT

Good quality,changed from a white DS Edge to a black one.Looks so much better and goes together well.Happy with the result.

I followed all of the instructions to the letter (taking 5 hours to disassemble and reassemble), I found that the pieces don't snap together perfectly. At first I thought it was user error, so I redid everything from scratch, to ensure that no screw was loose, or piece ajar, but unfortunately the gap caused by the material warping (I believe?) remained. Aside from this, it is decent. Though thankfully this was meant as a gift, as it would bother me to a high extent to look at constantly! There's no good grip cover that hides it, while still displaying the changes. Update: The manufacturer reached out to assist, and were able to help me fix it, so that there is no longer any gap. Much appreciated!