Anchormate Worth Anchor Reel, Black

I made a custom mount using PVC board from Lowes, I also used stainless steel screws to hold the winch down with locking nuts underneath. Testing it out this weekend but I am sure its going to be a lot better than pulling it up by hand. When in my 30s it wasnt an issue but now in my sixties it works on my back. I have had these anchors for 30 years. I looked at the reviews and ordered 2 anchor winches and and 2 anchor rollers. I bet I can drop these anchors in the water and pull them up in a flash.

bolted it to my 14' semi-vee hull aluminum starcraft after restoring it and it works great with the 15 lb. mushroom anchor I have. I reccomend mounting the anchor bracket to the prow plate and running the rope to the crank on the opposite side of the boat (i.e. if you mount the bracket to the port bow, mount the crank on the starboard side. Also, use eye bolts or something similar to make sure the anchor line spools onto the crank so that the rope is perpendicular to the axle of the spool, so that the rope will spool evenly.

this one replaces my old one that just couldn't be fixed, if the new one lasts as long as the other one i'll be very happy, the old one lasted twenty years and two boats, i'm glad they didn't change any mounting holes over the years, just had to unbolt the old one and install the new one ,made for a easy install

After some modifications, I have grown to like this quite a bit. The problem was that even with an 8lb anchor, the rope wouldn't unreel on its own. I would have to release the reel with one hand and pull the rope off the reel with the other. It could be because of the added friction of having 2 pulleys between the reel and the anchor mount, but that possibility should be engineered into the product. So I disassembled it and brought it to a friend that is an engineer to see if he could make it work. There is a section of the reel inside that has a spring wrapped around it that locks the reel in place. The release knob opens this spring up so it doesn't grab the reel and it is supposed to freely rotate so the anchor. In the end, he put the reel in a metal took .020" off the part of the reel where the spring wraps around it. He's a genius - now it works like it should. The other issue is the paint on the anchor mount. It's very thin and scratches down to the metal very easily. Not good when the unit is exposed to water. For the fishermen out there, you may want to know that the rollers in the anchor mount can be rather noisy. Feeding the anchor line off the reel by hand (the 2 handed method) may be to your advantage.

If you install it correctly it works perfect. Use heavy duty bolts and washers and itll last for years. I use it on a 13ft skiff and I fish inshore. It has been performing well on several trips so far. I spray it down with lithium greese every few trips. I get many compliments from it and it saves a lot of time and hassle. It is even durable enough to handle a 15lb sea anchor.

Haven't installed it yet. For the price you pay for this thing, it should probably include the pulleys it says you need for the anchor line. Doesn't include these"accessories". Disappointing. Have to go figure out what else I need to install this.

My husband and I fish but I hated hauling in the anchor- I'm not strong and I have back issues. This makes bringing in the anchor so easy! Our anchor is a bit heavier than it said to use, but it still works fine. My husband wants one for his anchor in the front now!

Legit and American made. Will hold 100' of 1/4" braided nylon (1200 pound cap.). Drum reel will be slightly over loaded. 70' of 1/4" braided is level with the drum rims if you are interested in "pretty". Roller guide sold here helps load the drum when in line with the "takeup" side of the spool and the bow pulley. Quality product. Well packaged and disassembly and parts breakdown included, in understandable American english.

the only thing i wish i would know and it dont mention anywhere is that wheel will work on an anchor up to 16 pound .... i would know this important details before i would not buy it .... my anchor is a 20 so i had to buy a new one for it ... but other than that very well made product made in USA not in china ...

Excellent product, very happy with it!

This is great turn the nob to release your anchor no pile of rope in the bottom of the boat to tangle up. After I figured out where to install purchase right screws and rope guide, easy installation I recommend this for anybody that has 12 or 14 boat.

Seems to work fine

makes it so much easier to retrieve the anchor