Windshield Repair Kit, Windscreen Tool for Chips, Cracks, Bulll's-Eyes and Stars

Description

Windshield Repair Kit helps you minimize the appearance and stop the spread of chips and cracks in your windshield. It removes air from the break, fills it with durable resin and makes it even stronger than before. For best results, repairs should be made as soon as possible after the damage occurs and before the break is contaminated by dirt or water. The kit works best on round damage not more than 1 inch in diameter, and cracks not longer than 12 inches. It will not repair damage to more than one layer of glass. Steps: 1.clean your windshield with dry towel, put the ceter ring over the broken point; 2.Screw resin chamber into center ring until it touches the impact point; 3.Squeeze resin into resin chamber; 4.Screw the pressure driver into the resin chamber; 5.Unscrew and remove the pressure driver from the chamber and then repeat the step 4 and 5 until there is no air bubbles remain in the break.(Make sure there is enough repaire resin in the resin chamber.) 6.Remove apparatus,apply curing srips. 7.Move windscreen into direct sunlight,wait for about 30 minutes, then scrape off the excess resin. Note: • Do not make repairs in direct sunlight. • Ideal application temperature is 60°F to 90°F (15°C to 32°C). Allow the vehicle sufficient time to acclimate to this temperature if it has been in a hot or cold environment. • Surfaces must be clean and dry to make a proper repair. • Do not allow the resin to come into contact with the car's painted finish, wiper blades, or plastic trim as this may cause damage. Not all damages can be repaired to restore full optical clarity. • Cure time (time it takes for filler to reach full set): 30 minutes minimum • Minimum temperature for filler to cure: 50 F Package include:1x Windshield Repair Kit