Indications for use
This device is intended for single-patient use in noninvasive breathing circuits to provide comfort to patients struggling with peak inspiratory flow, particularly with nasal pillow-type interfaces.

Directions for use

Make sure the flow-generating device is turned off.
Remove V̇-Com device from the package and place in the noninvasive breathing circuit between the hose from the flow-generating device and the patient interface (mask).
Verify all fittings are secure before turning on the flow-generating device.
Clean (or replace) V̇-Com device after each use or 24-hour period per instructions below.
Once the patient develops tolerance, the V̇-Com device may be removed from the breathing circuit.

Cautions
Single patient use. Do not attempt to sterilize. Use the cleaning instructions below. Before each use visually inspect the V̇-Com device to ensure the airflow path is not obstructed.

Warnings
V̇-Com device may affect algorithms for auto-titration and respiratory event detection. To minimize this possibility, do not place the V̇-Com device in an active breathing circuit. First, turn the flow-generating device off, place V̇-Com device in the breathing circuit, and then turn the flow-generating device on. V̇-Com has not been tested in adaptive servo-ventilation breathing circuits.

Cleaning Instructions
Wash with soap (e.g., Liquid dish soap) and water inserting a small, bristled brush in both ends of the V̇-Com device to penetrate and clean the complete airflow path. Twist the brush several times. Rinse with clean water and let air dry. Inspect for any damage or residue. If seen, reclean or replace. ***DOES NOT REQUIRE A PRESCRIPTION*** ***ACCESSORY ONLY***

Units	1 Count
Brand	Bleep

SleepRes V-Com | Inspiratory Comfort, Flow-Generating Device | Helps New Users Acclimate | Quick and Easy to Install

Description

Specifications

Common Questions