Pangda Peel and Stick Wall Molding Kit, 3D Premade Accent Molding Wainscoting Panel for Interior Wall Moulding Decor, Ready to Assemble Wainscoting Accent Panel(3 Set,24x96 in+48x96 in+ 24x96 in)

Amazing product. Easy to use if you have the right laser leveler. We painted added a fresh coat of Sherwin Williams Alabaster paint around it, to let the white trim subtly stand out more subtly. Anchors the living room and removes the focus on the low ceilings.

Not sure why the return rate is up on this one and when I went to look at buying again it recommended trying another product. As long as you’re measuring correctly this set is FANTASTIC! It completely changed the look of my dining room area. I cannot recommend enough. So we planned to texturize the wall but waited and stuck these on first. When we texturized— we wiped these off with ease right as we were doing the wall. That made me nervous that paint was not going to go on nicely to them. Now that I’m currently in the middle of painting them they’re just fine! They have a great stick to them which is surprising because most things you need to add your own adhesive and I swear these stuck so strong without anything added. They were the perfect size to the measurements they give — the hard part was just planning them out equally to our wall — which I would recommend doing before so you know these are a good fit (maybe why they get returned?). We had a laser level and just penciled the wall for the idea and then stuck them on. I’d say as long as you’re good with measurements and laying these out there’s nothing hard about using them. They work so well and add such a nice touch to a room. I’d never picture this but saw the idea somewhere else and it just works! Looks like a different room and was so easy!

PERFECT. Easy to use and they look great in our daughter’s nursery.

I absolutely loved this kit. Personally, I am not the most handy person so having something that came as a kit was very convenient for me. Everything came quickly and nothing was damaged. I didn’t cut anything or change anything- I used it as it came and honestly think it made such a great addition to my wall. The only challenging thing I would say about this is making sure you’re lining everything up even with each other because if you measure it incorrectly, it will look off. I chose to leave it white, but it is paintable. It’s very lightweight very easy to handle and honestly pretty durable for the material that it is. I even messed up a couple times and I was able to take it off very slowly off the wall without the paint coming off, which was such a relief. The only thing that I wish was different was if the longer vertical pieces came as one instead of two, because you can see a little bit of the line on where it splits. Overall, for the price that this was, I am so thrilled and love how it came out.

I’m not very good at handyman but I’m so surprised that I did it and I loved it!

Putting these on the wall is very easy. The layout in advance is where the time is spent. If the layout works, these go up effortlessly. I would recommend using AI for the layout. Put in the wall dimensions, and include baseboard height and height of door frames or windows. Also mention if there are sockets or switches if they might be in the way. Copy/paste the description of this product and ask AI for the placement. You can ask for an image of what it put together. If you have a laser level on a tripod that is great, but you can use a yardstick and level, too. When you are ready to apply the pieces, peel back the tape exposing only a couple of inches on each edge. Only press the edges in place until every piece is up. I started with a side edge because it was parallel to a door frame. If I messed up my angles, it would be very clear next to the door. If you need to pop off an edge for an adjustment, use dental floss behind the moulding, with a sawing motion, to dislodge the tape without damaging your wall. When everything us in place to your liking, slowly pull the paper tabs you've created to expose the tape on the moulding strip. It comes off the backing very easily if you DON'T press on the moulding while you're removing the tape. Wallboard joint compound works great to fill in the seams on the longer vertical sides. It's easier to wipe into place smoothly than Caulk. Like others have said, two coats of paint would be best. If your moulding is not going to be the same color as the wall, I would paint them in advance. Don't be scared. Good luck.

I was scared of buying this for the price and didn’t trust that everything would be cut properly or be of a good quality. But it was! I bought the 10 sets to install in my bedroom. I want to tell you some things I learned installing this product. For one, it’s very light weight and can be cut with a very sharp blade, saw, or scored and snapped. I needed to do this to make bigger squares. Since it’s plastic, applying paint takes a little patience and a few coats. I promise if you buy caulk and use it properly on this it will look super finished and professional. It can also hide areas you didn’t align it totally perfect. Hehehe. GET A LASER LEVEL. Mine was $20 and it sticks into the wall with pins. Measure your walls and do some basic calculations and it’ll look great. Also a nice clear sewing ruler was very helpful. These are very sticky and durable. I have basic plaster walls. Before you finish a square, do not press the last 2 pieces down fully. Allow yourself to align the last two and THEN press down. I promise. Those are my tips, you can do it!

Initially I thought I was just going to stick these on my wall and it would only take 15 minutes or so, I was wrong. First you have to decide how far from the base of the floor you want them placed, then how close to each other, then how far from the ceiling, etc. I wouldn't advise using these without a level, pen and tape measure. Having said all of that, it took me about 2-3 hours to put up. I later caulked and painted. The adhesive is great, for reference I have plaster walls not drywall. This molding has done wonders for this 128 year old wall! Definitely worth the money!

It took little longer to get. Secure packaging and all the cutting was done perfectly! It was my first time doing something like this and I surprised myself self on how good it looks! Nice quality and shape! Totally recommend.

It turned out even better than we expected! We've received so many compliments on it. The delivery was quick, just a few days, and we had no issues with any of the pieces. We made sure to double-check the lengths before applying them to the wall, and everything went smoothly.

Von der Machart gut, aber nicht für diesen Preis

Excellent produit! Un vrai plaisir à utiliser. L’installation est simple, même avec un peu de jeu pour corriger les petits écarts. Une fois posées, il ne reste plus qu’à peindre pour un résultat propre et professionnel.

Took way too long to arrive (2.5 weeks). The miter cuts of each panel doesn't match and won't be able to assemble into square and rectangular pieces. The return and refund is still currently being processed and it looks like it would take longer than the actual product to arrive to me. Very dissapointed with the product, the seller and their customer service.