Walnut Hollow Creative Versa Tool with Variable Temperature Control for Woodburning, 11 Points (Tips), Original Version, Basic Pack

Works great for:- WOOD- LEATHER (burning)- PLASTIC (welding = repairing stuff + cutting)-SOLDERING- IRONING tiny sections of PAPER or FABRIC-SEWING applications (Ironing: embroidery onto fusible backing,... Melting nylon/polyester thread or fabric to fuse together. Millnery applications: making flowers for hats etc.)Update October 2020:Still going strong and kicking!This is now in my TOP 10 ESSENTIAL TOOLS along with other basics like a hammer, screwdriver, iron, vacuum cleaner,...I have used this little tool SO MUCH.Example: I use it for Plastic Welding: Fixed my $230 Cuisinart 14 Cup pro food processor. 1 little plastic piece broke, and it would’ve cost me $65 to replace the bowl. 10 minutes with this thing and $0, fixed like new. -I’ve fixed countless friends’ things this way.10/10 recommend. Has saved me hundreds in repairs alone. Absolutely worth it. Will be replacing if it ever kicks the bucket.TIPS:- CLEANING the TIPS: Plastic welding/ soldering to repair broken plastic: get yourself a cotton cloth to wipe the tip on while you’re using it. (Has to be cotton. any synthetic blend fabric will melt onto your iron.) Then use high grit sandpaper (400, 600, or really 200+) to wipe the tip off on and scrape any gunk off. Makes your tips clean and like new.- SECURE THE BASE/ holder so you don't burn yourself: Use outdoor painter's tape to keep the hot tool securely in place on your table so it doesn’t slide away and so you won't burn yourself. The tape will peel right off when you're done. OrSecure to table by putting a piece of rubber shelf lining under the metal holder/base.- Secure the TEMPERATURE you want: with a little piece of painter’s, packing, or masking tape to secure the tool in the exact heating position you want. The dial can easily move, so if you bump it on anything, you might crank the heat up or down unintentionally. Sticking a little piece of tape: 1/2 on the tool, 1/2 on the heating wheel/knob, makes it stay exactly where you want it. Then when you're done it peels right off clean.- The Tape I use to hold the base in place and to hold the temperature dial in place:ScotchBlue 2097-48EC Painter Tape for Exterior Surfaces, 1.88-Inch by 45-Yard.It's my new favorite tape for all projects because it tears off in a straight line and sticks to everything while also cleanly peeling off of very type of surface.- Totally worth buying the extra tips: SE WP28 28-Piece Wood Burning Pen Tips. You may think you won't use some of these tips, and you're right, but you can grind them down with a dremel and make more pointed tips, since the plain pointed tips do wear out.

First off this is my first woodburning tool and I have to say I love it so far. Though keep in mind that I have had no prior experience with wood burning and just thought it might be fun to try and learn etc. I figured it could add some different elements to my hobby.With that said my opinion is coming from someone who had no experience with wood burning but had an interest in it.Here is my opinion of the tool and why I gave it five stars.Good:1. It is inexpensive2. It has adjustable temperatures3. It had interchangeable tips4. It worksBad:1. I am not a big fan of the stand, recommend that you tape it down when you work2. It feels like the temperature control is to close to the tool itself (does not make the tool unuable or anything; i just believe it should be a little further.3. I wish it was a little thinner just for better control4. I wish the tip and the base were a little further apartBottom line though for the price i have already found it to be worth every penny. I have attached a picture of my first wood burning. Its not great or perfect but hey for the first time ever I think I did alright. So hopefully that will inspire some of you to look into wood burning; I have never used one before and to top it off I am not very artistic when it comes to drawing.That said if your interested in wood burning and are a beginner I would recommend it. For the price it cannot be beat in my opinion (though I have nothing else to compare it to).I have not used this for soldering or anything other than wood burning. I will say this though if your interested in wood burning I would make sure you get one with an adjustable temperature, and I say that because different woods burn differently. I have used it on fir, pine, maple, and oak all at the same temperatures just to test it out on different woods. For example on fir it will burn it a dark black and cut into the wood pretty fast. I think the temp control just adds more control to the user which is very useful if your new.

For the most part I bought this for pyrography (or woodburning) which is a method of writing and drawing into wood with high temperatures. But there are a bunch of other woodburners out there, why did I buy this one? Well, this one comes with adjustable tips (And boy, do I love my adjustable tips!) for other jobs such as soldering, hot-knife cutting, image transfers and stamping, as well as some lead-free solder, which I appreciate since I was shopping for solder at the time, too.What did I expect it to do? Well, it was pretty cheap, it was meant to be, I think, a tool for beginners and that's exactly what I was looking for. I read some past reviews that complained about the tips breaking off and the temperature control not working and I was definitely hesitant to buy it for those reasons. 'Beginner's tool' should not be synonymous with 'shoddy tool'.It's been a couple of months since I bought it and after a long waiting period (I had to buy a step-down voltage converter since this is a tool from the US and I live in the UK) I got around to using it and I've used it a fair bit since. To address the complaints mentioned before: Thus far I haven't had a tip break on me and, although it does take a few minutes to heat up, the temperature control has been working perfectly (Or at least, it's been working - It's a yellow-orange-red scale so I'm not sure what the specific temperatures are supposed to be, but it's definitely hotter at red than it is at yellow).The tool stand it comes with is a bit minimalist, but it does the job and it comes with everything it's advertised to have, as well as a little guide for using the different tips, which is a nice little bonus. The case is also really good quality, nice clear and fairly tough plastic. One thing I'm confused by is the little plastic squares that come with it, what are they for?Overall, I'm pleased with the purchase, it does my woodburning stuff and other things that I haven't found my own use for yet (But I like having the option there, boredom won't go away on it's own), it's fun and easy to use, great tool for a beginner, and I'm hoping it'll take me past that, too. I think it could be improved by adding some sort of indicator to tell whether it's on or not, nothing too fancy, just a little LED would do fine, but, again, I'm happy with it.

This is extremely affordable and really fun to use. I have never had any experience with pyrography, and it is pretty intuitive to use. There are a lot of different tips, and I'm still trying to figure out what tips are used for what application. But hey, it's better than not having enough tips!Some important lessons I learned:- stay away from soft woods- stay away from grainy woods (plane off the top layer if you have to use a grainy wood)- I'm experimenting with different types of woods but I have found that cherry works really well- the flat round tip is for transferring images. You can print off a picture on a piece of paper, lay it face down on a piece of wood, and just slowly apply pressure using the flat, round tip. The image will be transferred to the wood, but know that it will be a mirror image of the original. Do NOT do this if you are planning on using the wood for serving or preparing food (e.g. a cutting board)- I have no idea what chemicals are in the ink, and burning the ink onto the wood will probably be toxic. Graphite paper is a good alternative that is safer for food applications (graphite is just carbon, when you burn carbon you get carbon monoxide and/or carbon dioxide...just make sure you are in a well-ventilated area)- every part that is metal will be hot, bear this in mind when burning designs onto wood...the round disk that is used for propping up the pen has ruined quite a few of my designs!- the long, rounded tip is really useful for cursive writing- the flat part of the bent tip is used for adding color to the wood; if you apply pressure using the flat part onto the wood, you'll burn the wood lightly and give it a brown color.- don't touch the metal part to test if it's hot enough! I can tell you first hand that this is a BAD idea...this pen heats up so quickly!- always unplug the pen when you are done

I purchased this in Jan 2021 and purposely waited until now to leave a review to prove how good this tool is. It's August .2025 now. Many reviews say it stopped working, attachmenst broke ect, I assure you if you use this properly and follow the instructions it will still work just as good as the first day you used it. First off, DO not switch the tips if it's hot or warm, just wait patiently for it to completely cool, if you get antsy and switch it too soon you can strip the inside and ends of tips, heat expanding and and cooling, science. Second, you must rub graphite inside before screwing in a tip, I also rub graphite on the end of the tip going into the tool, this helps them go in and come out really well. I've made lots of gifts and prizes for friends and absolutely love love love this tool. Use it properly and with love and I promise you won't be dissapointed!!! (PS : these are sanded before burning and stained after burning

I bought this because it was recommended to me for cutting out lace appliques. However, the Exacto knife tip doesn't heat all the way to the tip. The directions said it would take 5-7 minutes to heat up, and I let it heat up for more than 30 minutes, and it still wouldn't cut/burn. The heel of the blade would cut/burn (the tip closest to the barrel), but not the tip of the blade. I had to switch to a blunter tip. It's working, but it's not as precise as I had hoped for with the Exacto blade. Furthermore, the temperature recommendations are not accurate. By the directions, I should be using this on the lowest setting possible for cutting out lace appliques. But I had to turn it up to the top of the second level before it would start cutting/melting the netting that holds the lace together. It's getting the job done, but not like I had hoped. I highly recommend the use of silicone finger stalls to protect your fingers.

I bought this for my ex and she liked it, still works after a decade👍

This works very well but you have to use it with caution and be careful with it. But that should be obvious for most any tool and especially one that get's up to hundreds of degrees hot. I saw the negative reviews and I disagree. If you are careful and put the cord in appropriate places, like on the table surface, then you should not have an issue. It worked well right out of the box. freehand takes practice but it was perfect for branding letters on oak wood table I made for a friend out of an old wine barrel. I used it to put her initials on it and she loved it. Also, nice for soldering. It's a delicate tool that should be handled with great care. But it works well and I like it.

Muy contenta con la compra. Me llegó perfectamente y en fecha. Ademas, el primero tuve que cambiarlo por fallo técnico, pero Amazon procedió al cambio por otro igual y funciona perfectamente. Viene con toma y potencia de EEUU, por lo que si estás en España debes buscarte un convertidor de potencia. Pero aún así merece la pena por su excelente relación calidad/precio. Yo recomiendo el convertidor MOD. P.SUP.34-HQ para 100w y que puedes encontrar aqui en Amazon también.

Great tool. Heats up well. Great tips for different lines.

Me dejo gratamente complacida, tu ajustas la temperatura que quieres según el material a usar. No te quema los dedos. Los aditamentos que trae son muy buenos para la actividad que estoy realizando, lo recomiendo ampliamente.

Do una stella perché non sono neanche riuscita a provarla, in Italia ho dovuto acquistare le spine riduttore, dopo qualche giorno Amazon informa che quelle spine erano difettose e in effetti hanno fatto bruciare il mio pirografo, purtroppo non sono mai riuscita a mettermi in contatto con l'assistenza e chiedere un rimborso di questo pirografo visto che la causa non è stato lo strumento stesso, ma una spina difettosa

Good