Fitbit Charge 3 Screen Protector (Maximum Coverage)

These screen protectors are amazing. I’m glad that it comes in an 8-pack because I’ve replaced it 4 or so times. It’s also good because I messed up putting the screen protector on the first time I did it. I’m pretty clumsy and I end up bumping my arm/wrist into walls, etc. I get paint marks on the protector a lot. But the screen is still great.It doesn’t affect the touch screen at all. It’s very minimal. The first 6 months of having my watch I was very rough on it, so I replaced it 3 times. But it’s been about 8 or 9 months since I’ve last replaced the screen protector and it still looks pretty good.The installation instructions are pretty clear too. You just dip it in soapy water and then place it on the clean watch face. You don’t really want to push out the bubbles until it’s mostly dry or you’ll slide the protector off

Despite what others are saying about this product, I LOVE IT!!! It was very easy to apply and has not come off. Mine has been in place for about 2+ months now, I have had no issues and I am still on the first screen protector. I even accidentally scratched it with my fingernail a few days after I applied it. It came up on one corner but all I did was rub it back into place and it is perfect. It is very durable & easy to install. I am rough with my fitbit and the only time it comes off is the few hours needed to charge it. I even wear it in the swimming pool and the chlorine hasn't affected it. As a Healthcare worker I need durability, reliability and great cost. This screen protector is worth every penny!!! I wish this product would have been available when I first got my fitbit about a year ago. It is a great product and I would buy it again!!

I checked out the reviews before purchasing these screen protectors and was wary about buying these, but I wanted a screen protector so my Fitbit Charge 3 wouldn't get all scratched up like my Alta HR did.Putting the protector on was relatively easy. I just made a mixture of a little dish soap and water and followed the instructions. I did let my fitbit sit for a day so it could dry out properly because the screen protector kept sliding all over the place when it was still wet.I have been using the same screen protector for a couple of months now with very minimal problems. After about a week I was wearing a pair of rubber gloves for work and they rubbed against the screen of my fitbit, causing the screen protector to get a bubble. Instead of pulling it off and applying a new one however, I simply took a little soapy water and smoothed out the bubble. Voila, fixed screen protector. I haven't really had any major problems since.For the price you can't really beat what you get. Every now and then it will get a small bubble, but it smooths right back down easily enough. I haven't had any problems with the screen protector coming off completely or unexpectedly.

I've used the stick on and the slip on screen protectors for my charge 2. I thought I was buying stick (with actual adhesive) for my charge 4 and didn't realize these were 'wet method'. I figured I'd try them. As long as you apply them correctly these are AMAZING. The slip on ones get moisture behind (and dog hair) and are annoying to get on. The adhesive ones start to peel up quickly. These wet method protectors are solid. The key is to put your fingers in the solution and try to use your nails to hold the protector before positioning. Slide it into place while wet and press out any air bubbles, then LEAVE IT for several days to dry. Don't put it on the charger for a couole days because that will cause the edges to come up. It's actually a lot easier than I thought to use the wet method, so give it a try.

I installed this on 10/30/20. Following the directions: I washed my hands then I placed a few drops of liquid dish soap and warm water into a small bowel Made sure to mix it well. I cleaned the face of my fitbit with a eye glass cleaner pad and then wiped it with the cloth provided with the kit.The tricky part. The shields are attached to a plastic sheet and when i removed it I found the face attached to the sheet was tacky. This is the face that goes against the face of the Fitbit, so be careful to avoid contact with your finger tips as much as possible. Holding the shield dip it into your soap water mix; you need just 5 to 10 seconds max. gently shake the shield to remove excess water from it , then carefully place the sticky face shield on the face of the Fitbit. Gently apply pressure to the shield with you fingers and slide the shield into place.. Be careful at this point as the shield will still easily move around. Use the cloth to begin removing surface moisture from the shield and squeeze moisture from the mated surface. wrap the cloth over the plastic card provided and gently squeeze the moisture and air air bubbles out. This took me longer to type than to do. I had no bubbles left at the get go and put my fitbit on 2 hours later. I will update my review as to durability after wearing for a few weeks. 11/27/2020. I’ve been using this screen protector for about a month now, working in the yard, home maintenance projects, up on the roof installing Christmas lights and volunteering at a food pantry where I handle large quantities of canned goods. I put a couple of dings in the protector but did not scratch the Charge 4 face. I am pleased!

While the product includes an alcohol pad, microfiber cloth, and dust-removing tape to prep your device for installation, the screen cover itself has no tab or installation tape to avoid fingerprints. This makes applying the screen cover much too delicate a process and more prone to misalignment than necessary.Instructions indicate you should wet fingers to avoid fingerprints on the product, but when aligning the cover to the screen itself, your fingers will likely dry and potentially leave prints. The squeegee provided does help remove air bubbles well enough, but this can also leave dents in the surface of the screen protector. Trial and error cost me two of the covers to permanent smudges or dents in the cover film before I could apply one gently enough. Even then, the film cover has an irregular sheen from application. Based on this, I imagine any minor protection it offers will ruin the cover and force me to re-install another cover.Overall, the product is usable but user error is likely during the delicate process of installation, wasting some of your covers. I expect that the fragility of the screen cover film will result in wear and tear sooner rather than later. I would not buy this specific product again.

I only gave this 4 stars on ease of installment because it took me one or two times to get it perfect. That was mostly my fault for not paying close enough attention when I as aligning the shield on my fitbit screen. Once you get used to it, it is very easy.Once applied it works like a charm. It does exactly what it's supposed to do. When it gets dinged up and you want to replace it, it comes off very easily. The package comes with 8 shields so if you mess one up, not a big loss. I put my first one on in January 2020 and just today, Dec. 17th, put my fifth one on so they last quite ahwile.

I wouldn't call this an outstanding product, but it does it's job of protecting the screen on my Charge 3 and I would have no problem recommending it. The price is acceptable for what it provides.It is rather soft, almost rubber, and prone to scratches itself, but so far they appear to be self healing. I've had some paint from a wall corner I hit stick to it, but it washed off. So for protection, it's good.The downside is that it is not a perfectly flat invisible type of protector. It looks almost wavy and reflects light in a way that can make it hard to read in brighter environments.I have not yet had any issue with it peeling up due to charger usage as others have noted.

A+

Having cleaned the watch face I ignored the instructions and applied one of the protectors with a pair of tweezers. They are very sticky and difficult to remove from fingers! The reason I did not follow the instructions is if you use soapy water you have to wait a day before you can wear it. I managed to get rid of most of the bubbles and the rest disappeared the following day. The protector is much thicker than cheaper versions, which I have found come off easily. However touch commands seem to be very good. Unlike cheaper versions it is difficult to see if the protector is there. (I had to use a magnifying glass). I am confident about longevity but time will tell.

Vaut tout à fait l'investissement pour protéger la vitre de votre montre. Produit un peu mou qui absorbe les chocs. Colle très bien à la montre.

These are great. I did wonder why I needed washing up liquid and water however this made the application of the transparent protection cover easy. You would not know my Fitbit charge 3 had a cover on it and it fits perfectly. Well impressed and there are 8 covers so should last me along time.

Quality is bad.