OEM PKBX2 Double-Braced Adjustable X-Style Keyboard Stand

I had one of these that got bent with some heavier keyboards I use to use, so I bought a new one. It works perfect with my Roland FP4 which weight's 32lbs. It's stable and it dosen't rock front to back or side to side. It's light weight making it easy to carry. The legs are not long, so people don't trip over it when I'm doing a solo gig or band members when I do a band gig. When I got the stand, there was some assembly required. The directions were not too clear. I assembled it worng and had to take it apart and re assemble. There are 2 main bolts that hold this stand together, it only came with 1. I went to a local hardware store and got the bolt and washers I needed. That would be the only issue. All in all, it's a great stand for a light to medium light weight keyboard. Anything much over 40 lbs, you need something stronger. I had used a Roland xv88 for a while. The frame by a bold bent. So any of the new lighter keyboards like the 88 key keyboards like Korg Krome, Yamaha MOX8, Roland RD 300 family and Roland FP family, this stand is a good choice. Of course for 76 and 61 key keyboards, it's great. I'm a full time musician and work about 32 gig's a month and do all types of gig's. The stand is holding up in every enviorment I use it in. Great Keyboard Stand For The Price!!!

I have read other reviews and agree that the assembly instructions are limited. The hole spacing is different between each of the bottom stand supports and the top piano rests. If the wide spaced bottom stand support is on the left when facing the stand, then the wide spaced piano support will be on the top right. Note: the recessed (indented) holes should be placed on the screw head side.

I had looked at numerous stands for my Yamaha keyboard and didn't want to spend a ton of money for a professional grade stand (at professional prices). With that in mind, the Yamaha PKBX2 Double X Portable Keyboard Stand is a good choice at $29.99. I had seen other stands that were not as sturdy (single X stands)and cost about the same price. Tips for assembly: - Don't read the instructions, just look at the enlarged image of the keyboard stand on Amazon and assemble the stand the way it's shown. - The bolts for attaching the arms and legs come screwed in to the stand. Use the (included )Allen Wrench to remove them and then re-install them when you are putting it together. PROS: - Low price. - Solid, sturdy stand. - Works for just about any keyboard. - The stand's height is fully adjustable, and can be easily changed in several seconds - without having to unscrew anything. CONS: - There is no way to attach a keyboard to this stand. No screws, bolts or straps are included, even though most (including my Yamaha) keyboards have pre-drilled holes for screwing the board to a stand. The keyboard simply sits on top of the stand. I was VERY disappointed about this. - The included Allen wrench did not work for one of the bolts. The bolt came screwed in to the stand way too tightly to be removed using the included tool. The Allen Wrench only stripped the bolt, it did not loosen it. Luckily my husband had a better Allen Wrench of nearly identical size, and that one worked. Without it, we would not have been able to loosen the bolt.

Got here in a couple of days as usual with most things at Amazon. I was impressed that the box was heavier than I would have expected. If there is a 50/50 chance of getting it right, there is a 100% chance I will get it wrong. If they had just showed the diagram alone I would have had it together in 5 minutes. But no, they had to print instructions in Chinese translated English. First problem I had was finding the screws as many others have reported and as I had anticipated from other reviews. Other people said they were in the legs. so I picked up each leg and shook so I could hear which one they were in, to no avail. I figured logic would have it they would put them in the rubber capped arms. Nope. 20 frustrating minutes later my wife heard me cussing and said "What are these things screwed in the end of the legs?" I said, "Some kind of adjustment things, thanks, I have it under control." As she walked away she said, "I think those are the missing screws." Next in the instructions it said "short end of arms towards outside of stand."-- Whatever that meant. Just enough to mess with my head. Half hour later I had it together. I put the keyboard on it and it was like reaching up for Ape hangers on the old Harley you never owned. I thought why is the lowest setting so high, for a giraffe? I had the half moon perforated Height adjuster pointed down to the left rather than up to the right as pictured. Easy fix. Anyway a couple of pointers for others who buy this. 1) there are 2 pair of round pipes with rubber ends. The shorter pair are the upper arms. The longer pair are the bottom feet. 2) The upper shorter arms differ with narrow and wider bolt holes, One goes on inside pair of legs and one on the outer. 3) Repeat of above for the feet on bottom. 4) The extra round chrome washer that wont fit over the square part of the carriage bolt goes in between the 2 legs to keep them separated slightly. Instructions leave a lot to be desired. but the product is very solid to hold your keyboard, inexpensive and I am happy in the end.

Does a great job holding my Yamaha weighted keyboard, though it was pretty difficult to assemble. The instructions are terrible - I had to find a video on Youtube, and even then it was pretty hard. Ended up taking way longer to assemble than it needed to (about an hour?). However, now that it's all set up it works great!

For the purpose for which I bought it, I give it zero stars and hope it is removed as a recommended accessory for the drum set. This stand was recommended for the Yamaha DD35AD Touch-Sensitive Digital Drums with Guide Lights and AC Adapter. I ordered both. As other reviewers noted, the lack of detailed instructions was very frustrating. The four 'feet', two legs, and small plastic bag containing an allen wrench, bolt, two washers, and a nut were in the box with the small paper containing 'instructions'. It took me over an hour to put the stand together - mainly because I could not locate the feet/leg screws. The screws to hold the 'feet' were actually screwed into the legs, a point not mentioned in the instructions. The bag with the bolt, two washers, allen wrench, and nut was, I believe, missing a washer as the stand wobbles. To adjust the height, you will need to pull out on the round handle on the legs once you get it all together. This may seem obvious to many, but it is not to a first time user of this type of stand. Once I finally got the stand assembled, I placed the drum set on top. The drum set would have fallen to the floor if the stand had not been next to the bed. Luckily the drum set fell on the bed instead. No matter how much I tried, the drum set would not sit on the stand. I'm debating whether or not to return the stand as I have an APO address and to received it, I had to have it mailed to a relative in the US who then mailed it to me as it would not ship directly. Maybe it's suitable for an electronic keyboard, or something that has a flat bottom, but not for the irregular shaped bottom of the drum set.

Excelente

infuriating product.. assembly instructions are completely whack.. first image says lay the first preassembled part one way, then in the next image the part has been turned over the other way with no explanation. Some images show the height adjusting plate facing inward, others show it facing outward. Thought it was missing some washers and other hardware at first.. However, one set of legs which, according to the instructions, is not supposed to be pre-assembled did, in fact, come pre-assembled, which I realized is where the “missing hardware” went. On top of all this, I ordered this product because I believed it to be “Yamaha” brand. I realize its labeled as “OEM”, but I really expected Yamaha branding somewhere. There is ZERO info on who manufactured it. Not printed on the box or “assembly” instructions. Because Yamaha is a reputable brand, I thought it make a nice budget friendly gift, but without the Yamaha branding it just looks like I bought a cheap off-brand gift. After a lot of frustration I was able to find a picture online that shows it at an angle that allowed me to figure out assembly, which turned out to be very simple and overall im glad i didnt return it on impulse. Upgrading from 0 star to 3 star. Would give a 5 star for the price if not for missing the Yamaha branding and and bad instructions.

Aquí le envío las fotos solicitadas. Gracias.