UCONTRO CNC 200 KHz 3 Axis USB Mach3 Motion Control Card Breakout Interface Board Controller,12-32V DC Input
Product ID: 83132512
Desertcart purchases this item on your behalf and handles shipping, customs, and support to Cote D' Ivoire.
Size:3 Axis Package Contents: 1 x CNC 200KHZ USB MACH3 Breakout Board 1 x USB cable 1 x CD Specification: Support USB; 12 ports photoelectric isolated input interface for ordinary digital data; 10 ports photoelectric isolated output interface for ordinary digital data; 1 port 0-10V spindle speed analog output interface (can change to PWM output); Can support 3 axis stepper systems, 200 KHz pulse output for every axis; ARM motion control chip; Main device is 12-32V DC power supply input; current should higher than 0.5A; Compatible with MPG input, support the digital display MPG from our company. Appearance and structure and size: This motion control card is with a sealed shell structure. There are 4pcs setting holes at the bottom. We can fix 4pcs 4mm diameter holes at the cabinet and install the controller into the cabinet. The products overall size is 163.1mm*80.8mm*27.8mm; The bottom install size is 101.4mm*42.5mm Connection define and method: As the Figure showed above, the connection of the controller includes power supply interface, Ethernet connection interface, MPG interface, Stepper/Servo control output interface, spindle control output interface, Estop and limited switch and tool setting input interface and so on. Now we descript them in details as below.
S**N
Waisted money!
This is the most worthless motion controller ever made. Looses its place, freezes up and stops communicating with the computer in the middle of a program run. Zero tech support from the factory. Do not buy this it’s a complete waste of money and time. It dosent even deserve a 1 star rating. It should be a zero!
M**N
Esc spindle interference
Let me give you guys a tip. With this board I was having issues as well. The problem comes from the spindle. You get a lot of interference from the inverter. My issue was my neutral wire was getting a bad connection. Once I turn on the spindle it was causing miscommunication. I ended up building an old windows 7 PC and still had the same problem. So I would give this thing a break and try working with your power inputs.
A**R
Great folks!
Good to work with.
Trustpilot
3 weeks ago
3 weeks ago