Thermaltake LANBOX LITE Micro ATX/ ITX Gaming Cube PC Case, Black VF6000BWS

What's good about the case: Beautiful gloss black finish, well-made Solid case, not cheap and flimsy. Completely modular. All components can be removed, from the motherboard tray to the hdd bay to the DVD tray and even the psu, most by just removing some thumbscrews. Plenty of room for my micro ATX mobo, 3 hdd's, 1 DVD and Corsair psu. I was even able to route the extra cables for a clean-looking installation. Super-quiet dual rear fans, I can't even hear them run. Front 92mm fan can be heard but is not objectionable. All 3 seem to keep my HTPC cool and quiet. The hidden DVD tray is a nice touch and works very well. I also LOVE that they replaced the center motherboard stand-off with a kind of stud. It holds the mobo in place so you can easily install the screws. What's not so good: Side windows are nice but they do show the dust, They're not real easy to clean unless you get creative with some kind of cleaning "wand", otherwise it might take disconnecting a few things but the modularity of this case makes that super easy. Knowing this now, I still think I would have purchased this window model. The plus's offset the minus's by far. With that beautiful gloss black finish on the outside, you would think they would have painted the modular components at least a flat back instead of the natural "silver" finish. Once I get past the warranty, I'll be pulling it apart to paint the inside. Which of course will be SUPER EASY due to the modularity! Did I say that already? System Specs: Asus M4A88TD-M USB3 G.Skill DDR3 1333 2x2gb AMD Athlon II X2 250 Asus Xonar DG sound card Corsair CX430 psu Hauppage HVR 2250 (3) Samsung F3 Eco-Green 1tb hdd Other thoughts: I'm working thru a problem right now with my HTPC resetting itself. At this point I can't tell if it's a case issue or a motherboard issue and it's intermittent. I have the front panel controls and USB/Audio disconnected at this time to eliminate them. I don't know if anyone else has had this trouble. I'm leaning toward the motherboard but at this point I don't know. I know the motherboard is not shorting to anything.

Let me first state that this is not your typcial small form factor (SFF) mini-ITX/micro-ATX case! This thing is quite large and the reason for this is it's designed as a gaming case with enough room to fit large dual slot graphics cards and a full size ATX power supply which is not included. Build quality is good but don't expect Silverstone level quality as there's no aluminum here, only steel and the front panel is all plastic, but given the price it's expected. The glossy black painted steel top cover blends in nicely with the glossy black plastic front panel. This is a very functional case. The front larger blue LED intake fan is quiet and draws in cool air via the vented front lower panel. This fan also blows cool air over the hard drive if you choose the bottom mount position. The two smaller rear exhaust fans are also very quiet. All three fans come with molex connectors and have no provision for speed control via the motherboard's system fan header, however given that the fans are so quiet you don't really need to control their speed. The slide out motherboard tray is very convenient but its usefulness is best during initial builds when the case is basically empty. Once you connect all the wires to the motherboard you won't be able to slide it out without removing the wires. In other words you'll only want to slide it out if you upgrade the entire motherboard as everything else could be upgraded without the need to slide it out. For example upgrading the CPU/fan/heatsink is easier if you just lift up the power supply cage out of the way instead of disconnecting all wires just to slide out the motherboard only to have to reconnect all the wires back again which is a PITA. The two 5.25" drive bays are very useful for those who like to install separate controls and/or displays. For non-gaming rigs they could be used for dual optical drives so you could make direct copies without copying to the hard drive first. On my setup I have one Blu-ray burner and one dedicated DVD burner installed in the two bays. On the left vertical 3.5" bay I have a multi-card reader installed. In my system with an AMD FX8120 clocked at 4GHz the loudest fan is the stock CPU fan which spins up to 6K rpm under full load. Under normal everyday internet browsing the system is not very loud. Case temperatures stay manageable under full load but I'm only using onboard integrated graphics so keep that in mind.

Not a bad little case. Built a desktop for work; it's nice and compact, so it's easy to place on a desk, and looks pretty sleek from the outside. Not as modular as Tt's newer cases. My home rig is in a Core v21, and the arrangement options are way more versatile. This case is not super easy to build in due to its size, but it'd be way easier if you could quickly remove the side panels with thumb screws like all their newer model chassis. Cable managment is tough, and you might have to get creative running sruff beneath the mobo. Also pretty bummed all the internal mounts and cages are silver. With that black gloss finish on the outside, its an eyesore to see so much silver in the guts, esp if you have LEDs. Also wish there were front panel replacements for the 5.25 optical drive slots, which I'm not using. Pros: Nice aesthetics and compact, comes with 3 fans (2x60mm, 1x 80mm), good window visibility, well ventilated, solid Tt build quality, good price Cons: No 120mm fan mounts, no 2.5" drive mounts (you'll need a converter for an SSD), no front panel USB 3.0, irreplaceable optical drive-tray-slots, useless floppy drive slot

Pros: - Very modular case, I cannot believe how easy it was to install the parts even though it was cramped when assembled. - Cooling setup better than I expected even though ambient temperatures on load can exceed 40*C (see cons as well) - Looks amazing with interior lighting thanks to the acryllic panel - Very solid build - Accepts regular-sized PSUs! (Don't expect to cram in 1000+W elongated power supplies) - Accepts fairly large graphics cards. I have a 9800GTX+ double slot card barely fitting. Supposidly will do SLI but you will have to sacrifice one 3.5" drive on the side. - Fluorescent orange 60mm fans are a nice touch Cons: - WARNING: do not put pressure on the acryllic panels! I made the mistake of gripping the case near the arcryllic and squeezed it too hard (and cracked it across). The ventillation cuts make the panels fragile. This wouldn't happen normally but my chair slid out from under causing me to squeeze the panels too tough in anticipation for the rough fall. - Cuts in the arcryllic panels make it difficult viewing the components inside, defeats the purpose of having the panels? - The fans are noisy by my standards, far too audible but hey it's a gaming case. The 60mm fans don't even appear to be moving that much air anyways. Could have benefited from a design where there is a bigger fan there but the case is already oversized as is. - The ambient temperature inside the case gets very very hot, I don't think I would even attempt to overclock this bad boy (I previously housed this CPU in a different rig at (232x12.5) ~2900 MHz) - Edges are sharp, lost some blood putting parts together - No handle for easy transportation? - Blue light in front is way too bright I sharpied it. - Conversely the red HDD light is way too dim compared to the blue power light, maybe I plugged it in incorrectly? (doubtful) - The inside is a brushed silver aluminum color. WHY? Why didn't thermaltake also paint the inside the same as the outside? Such a bummer. - Fingerprint magnet System Specs: CPU: AMD Phenom II X4 805 AM3 2.5GHz (200x12.5) HSF: Zalman CNPS7000C-ALCU MOBO: MSI 880GM-E43 RAM: Corsair 4GB (2x2GB) DDR3 @ 1333MHz GPU: PNY 9800 GTX+ 512 MB PSU: Thermaltake 600W HDD: Seagate 400GB SATA OPTI: Sony 20x DVD+/-RW PATA OS: Windows 7 Pro x64 MONI: Samsung BX2231 21.5" 1080p LED LCD BLING: NZXT Red LED Case Light 2m Overall: Still a good buy. Don't expect it to be super duper quiet because this is more of a gaming rig box for hauling to LAN parties where noise isn't a big problem, but you will notice the noise in a living room.

One of the better Micro ATX cases around, in my opinion. Sturdy build, nice placement of most components, decent airflow, and looks great. While the case is nice and glossy, it is a magnet for finger prints. The stock blue glow is subtle enough that it wont light up a room but strong enough that you know it is there. I would give 5/5 if it were for two things: - The cast is a bit deeper than most. I have read this in other reviews and you can see how large it is in the pictures. While I expected it to be even deeper than it is, I would still like to see the size cut down a bit. - I did not like the placement of the top optical drive. Because of the flip-down doors, the drive is hidden. However, to install the drive, you must take out the mounting bracket and guess what screw holes to use. On top of that, the screws on the same side as the floppy drive are somewhat difficult to get through unless you have a long and thing screwdriver. I would say each of these complaints merits a .5 (probably less) deduction.

The thermaltake Lanbox lite is one of its kind. I love the removable motherboard tray which made my life easier on installing my components. It doesn't take too much space inside your house and it looks awesome too with the side panels being transparent. Also, the side panel has a grill which adds extra ventilation to keep your PC cool. Few things that you have to take note when going for this product: 1) Make sure that your CPU heatsink is no more than 100mm in height. When I built my brother's PC with this case I chose a Cooler Master Vortex Plus CPU Cooler RR-VTPS-28PK-R1 which is only 59mm in height plus the radiator fins goes over my RAM sticks and provides cooling for them. My RAM sticks are Kingston HyperX Blu 8GB (2x4GB) Low profile heatsinks. If you choose a RAM sticks with a high profile heatsink, you will have to look for another CPU heatsink like the slimX3 by Thermaltake. 2) If you can, spend extra on a modular power supply because it will make your building easier. I went with corsair's TX750M for this. But any PSU will do if you can't afford a modular one. 3) The chassis will not fit in a video card longer than 10 inches. I have put a EVGA GTX 550 on my brother's build. I could have bought him a better GPU but you know... BUDGET... :P If you want to know the full build of my brother's PC, scroll down for the parts so you can imagine how it will look like should you choose to build with this case. CPU: i3-2100K LGA 1155 MoBo: Asus p8H61-M LE/CSM LGA 1155 Memory: Kingston HyperX Blu 8 GB 1333Mhz DDR3 (4x4GB) Heatsink: Cooler Master Vortex Plus CPU Cooler RR-VTPS-28PK-R1 PSU: Corsair TX750M GPU: EVGA GTX 550ti (Fermi) 2Gb 192-Bit GDDR5 ***EXTRA: Vantec SP-FC70-BL Spectrum System Fan Card with Dual Adjustable 70mm UV LED Fans (Blue) ***Blowing towards the GPU. Chassis: Thermaltake Lanbox Lite VF6000BWS MicroATX/ITX Gaming Cube PC Case (Black) Well that's all I guess.. I hope this review helps. Jan Meden V.

I built a new computer and I used this as my tower, if you want to know the pros well read all the 5 star reviews previously posted and you will see them listed very clearly there. Now for the life in me I could not figure out how to slide the top lid back into place. I studied the slot mechanism that is suppose to fall in place once pressure is applied but the fact is that I could not get enough pressure to slide the lid back in place without bending the metal. I built the whole computer in 2 hours and spent an hour trying to close the top lid. I gave up and decided to test my luck another day. If anyone knows the secret to closing the lid please leave a comment. As for my other complaint this box did not provide an adequate slot for placing a generic media card reader anywhere on it so that was a downside. Apart from that I had a little hard time adjusting my mother board to the power cable provided since they were different from one another and I ended up having to adapt the cable in order to make it work. Good luck to you guys with this great tower. It really is amazing! now if it had only brought an extra 6mm fan with it. EDIT: I finally figured out how to fully close the top lid. It was bent in a spot, which I easily corrected. However the power button broke and the backside USB port along the front USB port all have broken in half after 2 years of little use.

I wanted a case to replicate an old Ultra Micro Fly case (which is not available) and this succeeded. I choose this Lanbox because I need external drives in a smallish cube case for my video processing and statistical analysis computer. Few of the new cube micro ATX cases have external drive access, and if they do, they look horrible. This case is attractive, external drives are hidden, case fans are very quiet. Motherboard tray slides out. Solid steel build. My only complaint is that neither side panel can be removed. You can, however, slide the tray out completely, or completely remove the power supply mount to obtain cramped access to the MB. Inability to slide access the MB via side panel is a hassle, but not a show stopper. The other complaint is that the front USB connectors are v2, not v3. Again, not a problem, because I have a small drive tray with two USB3 headers that fit nicely into the vertical external opening. One makes do. I have a MB with a Ryzen 7 1700 and the Wraith Spire CPU fan has plenty of head room below the power supply. This case was first sold in 2008 for $125 with a huge carry handle and seems to have staying power in the market, sans handle. The enduring fad for clear side panels turned me off at first, but now that the internal LEDs are breathing pleasantly, I am liking the subtle bling. Time to throw out the old Antec full-tower server case that doubles as a bomb shelter? Was going to give it 4 stars due to the immovable side panels, but the case does provide adequate access and is quite nice, quite and inexpensive, so it receives a 5. I would recommend!

This is a great product. I've built over 50 systems and it's by far the best one I've ever worked with. The internal chassis comes out for easy install of optical and hard drives. The mainboard tray comes out for easy install of the MB and any expansions cards. It's very stylish in its piano finish with windows. The ventilation for cooling is fantastic, the best of any of my builds. I would recommend this one to anyone interested in building a system. Just remember its for the Micro ATX or Mini ITX platform. The seller was very good in the shipping of the product; here the next day in perfect order. I would do business with them again.